1st gen sv650s stickers

[MidnightMike]

Im just needing the measurements for the stickers that Ive circled in the pics asap please!

Need to have them made up by the signwriters (Tomorrow most likely)

Bling for whoever posts them up!

CHEERS!!!!!

[Pussy]

I used to have a spare 1st gen front fairing out in the shed.... try Number One or Sully 60, they'll have the dimensions

[erik]

the letters on the tank are 27mm high and the entire word "SUZUKI" is 191mm long (was a little difficult measuring the word length since the tank is curved.

The side fairing stickers are 25mm high and 222.5mm long measuring the silver bit of the sticker. I pulled my ones off when I plastic welded the fairings, but haven't tried putting them on again because I haven't painted the fairings satisfactorily yet. (and I'm not sure if I'll be able to get them to stick again, having pulled them off already). I have a 600dpi scan of them if that'd be useful.

[McDuck]

get mstrs to do them..... hes good....

[MidnightMike]

the letters on the tank are 27mm high and the entire word "SUZUKI" is 191mm long (was a little difficult measuring the word length since the tank is curved.

The side fairing stickers are 25mm high and 222.5mm long measuring the silver bit of the sticker. I pulled my ones off when I plastic welded the fairings, but haven't tried putting them on again because I haven't painted the fairings satisfactorily yet. (and I'm not sure if I'll be able to get them to stick again, having pulled them off already). I have a 600dpi scan of them if that'd be useful.

Cheers, bling sent.

That scan might be very usefull, will check with the screen printer.

(Id have to change the colours though, its not going to be yellow again...)

[MSTRS]

get mstrs to do them..... hes good....

I don't do 'fade' effects...they have to be printed, check the SV in the pic