Toast
9th March 2009, 10:43
SOLD!!!!!
...to Clivoris
CBR600RR ‘03/’04 model
Extras:
Has the improved ‘05/’06 engine – apparently a better head design than the older gen giving better midrange power
Ohlins 46PRXLS shock (serviced, with receipts)
Racetech fork internals done by Robert Taylor (have receipts)
Hyperpro RSC dual-rate steering damper
Arrow full system exhaust
PC3 custom mapped by GP Honda
F1 Engineering rearsets – great product, don’t seem to shatter like some of the big name overseas brands that I’ve seen
Woodcraft crash bungs
Cam-tensioner mod
Practically the full range of front and rear 520 sprockets needed for NZ tracks and street circuits
2 meet old Renthal self-regulating chain
Also has a bit of road gear…definitely a head light and indicators and possibly a bit more
Spare rims in very good condition with discs both ends
Spares:
Spare engine covers both sides
Spare swingarm (brand new)
Spare dash
Different weight Ohlins shock springs
Different weight forks springs (Traxxion or Racetech from memory)
Stock rear shock
Footpegs, sprocket carrier, heaps of other stuff
Service History:
Has had oil (full synthetic) and filter changes after no more than 2 days’ use. I used to do it after every day but that was just overkill
Rear shock serviced and valved by SuspensionTech per RT specs early to mid-08
Forks upgraded with Racetech stuff and new oil late-08
Head taken off the engine, bores inspected, shims and tappets done plus a few other things by Warren Bridge 2H08. Warren said that the bores still had machining marks and were basically like new
The bad:
Fairings are pretty average quality in fit and finish – although better now that a professional generously touched them up and strengthened them
Engine covers scratched both sides – but have good condition spares as mentioned above
The shitty little stock dash mounts are broken and I have just wired the dash to the front subframe
I’m not gonna lie, it’s been crashed. But seriously most of them were piddly little low-sides that did nothing but scratch plastic. One major crash bent forks and front wheel which were both replaced. A high side on some oil at Wanganui08 broke a footpeg bracket and front subframe both of which were replaced.
The good:
If it looked mint you’d pay more!!!
Great handling bike – and a few at the Nationals commented on how nice it looked to handle.
Especially good fun at street circuits.
Not made of cheese metal like the new ones
It’s cheaper than a new one so you can buy it then actually afford to ride it :)
Would be a great bike for a first time racer or serious track dayer.
Welcome to view. Bike will be in Whangaparoa, 45 mins North of Auckland. Viewing welcome.
PM me, text or call 029 201 2473 with any enquiries
Cheers,
Phil
...to Clivoris
CBR600RR ‘03/’04 model
Extras:
Has the improved ‘05/’06 engine – apparently a better head design than the older gen giving better midrange power
Ohlins 46PRXLS shock (serviced, with receipts)
Racetech fork internals done by Robert Taylor (have receipts)
Hyperpro RSC dual-rate steering damper
Arrow full system exhaust
PC3 custom mapped by GP Honda
F1 Engineering rearsets – great product, don’t seem to shatter like some of the big name overseas brands that I’ve seen
Woodcraft crash bungs
Cam-tensioner mod
Practically the full range of front and rear 520 sprockets needed for NZ tracks and street circuits
2 meet old Renthal self-regulating chain
Also has a bit of road gear…definitely a head light and indicators and possibly a bit more
Spare rims in very good condition with discs both ends
Spares:
Spare engine covers both sides
Spare swingarm (brand new)
Spare dash
Different weight Ohlins shock springs
Different weight forks springs (Traxxion or Racetech from memory)
Stock rear shock
Footpegs, sprocket carrier, heaps of other stuff
Service History:
Has had oil (full synthetic) and filter changes after no more than 2 days’ use. I used to do it after every day but that was just overkill
Rear shock serviced and valved by SuspensionTech per RT specs early to mid-08
Forks upgraded with Racetech stuff and new oil late-08
Head taken off the engine, bores inspected, shims and tappets done plus a few other things by Warren Bridge 2H08. Warren said that the bores still had machining marks and were basically like new
The bad:
Fairings are pretty average quality in fit and finish – although better now that a professional generously touched them up and strengthened them
Engine covers scratched both sides – but have good condition spares as mentioned above
The shitty little stock dash mounts are broken and I have just wired the dash to the front subframe
I’m not gonna lie, it’s been crashed. But seriously most of them were piddly little low-sides that did nothing but scratch plastic. One major crash bent forks and front wheel which were both replaced. A high side on some oil at Wanganui08 broke a footpeg bracket and front subframe both of which were replaced.
The good:
If it looked mint you’d pay more!!!
Great handling bike – and a few at the Nationals commented on how nice it looked to handle.
Especially good fun at street circuits.
Not made of cheese metal like the new ones
It’s cheaper than a new one so you can buy it then actually afford to ride it :)
Would be a great bike for a first time racer or serious track dayer.
Welcome to view. Bike will be in Whangaparoa, 45 mins North of Auckland. Viewing welcome.
PM me, text or call 029 201 2473 with any enquiries
Cheers,
Phil