SCOOTER DYNO DAY (Postponed)

[ICE180]

Not enough people will try another day

[Dave Lobster]

I'll be up for that, if it's not gone pop in the meantime.

I've told a couple of others too, but they've got standard bikes, so it might be a bit pointless.

[ICE180]

standard

means they can see what there starting point is

[Dave Lobster]

4hp probably..

Rob's up for it. It's as real a scooter as an indian Lambretta gets..

[MisterD]

I'm in for sure Kane and Fairlie has never had (either of) his properly dyno'd.

[Dave Lobster]

Have you fitted the can yet? :)

[insane1]

if im allowed can i bring the burger.

[MisterD]

Have you fitted the can yet? :)

Nah, I'm picking up the stripped bits from the chrome platers tomorrow (don't panic, they're only taking the old crap chrome off! ) then I've still got to get the powder coating done...after that it's a few minutes spanner work to put it together and playing with the carb...

[ICE180]

Any sort of scooter is welcomed
big or small auto manual 2T 4T
so long as its a scooter thats all

[ICE180]

I'm in for sure Kane and Fairlie has never had (either of) his properly dyno'd.

Yes we will have to get at least the bella on the dyno for farlie

[Flatcap]

Yes we will have to get at least the bella on the dyno for farlie

Might even have it unbent by then...

[Flatcap]

Count me in

I will do the Dragster - Be interesting to see how it compares to the Gilera,



....Plus I can get some money off you for that chamber...

[UberRhys]

Might even have it unbent by then...

Huh... :shit::slap: what's the story here?

[Flatcap]

Huh... :shit::slap: what's the story here?

Once upon a time there was a driver with English as a second language who was incapable of giving way.......

[MisterD]

Once upon a time there was a driver with English as a second language

Narrow it down a bit CQ, that describes most Kiwis I've met....

[Flatcap]

Narrow it down a bit CQ, that describes most Kiwis I've met....

Your engrish she not so badly

[NSR-Dan]

im keen providing my scooter is finished by then

[HungusMaximist]

Is this open to motorcycles too?

I need to get my CBR929 tuned. Wonder if it works the $50 a pot.

[ICE180]

will ask if we can do a bike or two to get the numbers up if we dont have enough scooters

I could try and orginise a day for bikes one day as well ???

[Flatcap]

I could try and orginise a day for bikes one day as well ???

Only if they are 2-smokers

[Dave Lobster]

I'll be up for that, if it's not gone pop in the meantime.

I've told a couple of others too, but they've got standard bikes, so it might be a bit pointless.

I'm now out.. I have no licence until the 29th June.

[Morcs]

I'm now out.. I have no licence until the 29th June.

You win. I have no license until the 30th of june.

Wanted to get on hendersons dyno after red barons underreading dyno said my fazer only had 85.5hp.

[Dave Lobster]

.5?
Scooter dyno, is it?

That's pretty good for a Fazer, isn't it??

:)

[Morcs]

.5?
Scooter dyno, is it?

That's pretty good for a Fazer, isn't it??

:)

Im sure it is, but apparently different dynos read differently - a guy in Oz on the FZ6 site, with exactly the same mods and tuning got 95hp...

[ICE180]

have you just bolted on the bits or have you had it tuned as well ????
But then again the ozzy tend to extend the truth alot like dragon split enz etc

the cars that I have had always get a dyno tune that way you know what is going on as well as how much actual power you really have

[insane1]

how many are there for this so far .

[ICE180]

about 5 but will try and round up more soon

[Dave Lobster]

about 5 but will try and round up more soon

If you can postpone it for a couple of weeks, I'll be able to go.

[The Pastor]

i would be keen if i can get my cbr 250 (bike) on there?

[ICE180]

o far I have 5 people
buy reading this thread
Insane1
Flatcap
MisterD
NSR-Dan

in total 7 including other sites where it is posted

AT present it is still on but at $75 each if we get another 3 it will drop to $50 each

If you want to say no let me know buy Tuesday 23 june so I can confirm numbers and price with Henderson Yamaha

[Morcs]

o far I have 5 people
buy reading this thread
Insane1
Flatcap
MisterD
NSR-Dan

in total 7 including other sites where it is posted

AT present it is still on but at $75 each if we get another 3 it will drop to $50 each

If you want to say no let me know buy Tuesday 23 june so I can confirm numbers and price with Henderson Yamaha

$50 is still pretty expensive, is that with any tuning?

I had mine do a run for free when my front end was being blinged.

[ICE180]

normal cost is $135 +gst per hour during there normal working hours
the time we have is when they are normally shut so its not too expensive

we can see if tuning is possible on the day

[The Pastor]

normal cost is $135 +gst per hour during there normal working hours
the time we have is when they are normally shut so its not too expensive

we can see if tuning is possible on the day
so are we allowed bikes??

[ICE180]

not at the moment will try and talk him round let you know next week

[MisterD]

How do those numbers equate to ability to muck around with the jetting - I'm not sure at the moment that I'll even be close enough to ride it over there at the moment. It will depend on how much time the boys give me to play around with it this weekend!

[ICE180]

I will try another time not enough people

[Dave Lobster]

Yay! I'll be able to come then :)

I'll try and get Stew along too when he's got his RT kit fitted.

[insane1]

what"s the story with this now is it going to happen any time soon, have just got the yoshi on so it should be interesting.

[ICE180]

will look into it over the next few weeks

[Dave Lobster]

what"s the story with this now is it going to happen any time soon, have just got the yoshi on so it should be interesting.

System, or just end can?

[insane1]

full system.

[Dave Lobster]

PC3?

10 char

[insane1]

no pc3 needed at all.

[insane1]

just had a call from henderson motorcycles will cost $100 for them to put the burger on the dyno usual a/f ratio mix hp results maybe worth doing.

[Dave Lobster]

Might be worth picking one of these (http://www.powercommander.com/powercommander/powercommander_iii_usb.aspx?mk=13&mdl=98&yr=2007) so that Mr Dyno can do something about your fuelling if it's out.

[ready4whatever]

i wonder how powerful you could get a 50cc scooter (fully engineered with lots of go fast bits) would be interesting

[TripleZee Dyno]

Might be worth picking one of these (http://www.powercommander.com/powercommander/powercommander_iii_usb.aspx?mk=13&mdl=98&yr=2007) so that Mr Dyno can do something about your fuelling if it's out.
Or save yourself $6-700 and tune with the Teka Tuner. In Auckland Ray Clee, Haldanes and myself have one
cheers

[Dave Lobster]

Or save yourself $6-700 and tune with the Teka Tuner. In Auckland Ray Clee, Haldanes and myself have one
cheers

How much cheaper? The PC3s are only $470 delivered from Oz..

[insane1]

i can even get them cheaper from the states round $460 alot better than buying one here.

[TripleZee Dyno]

How much cheaper? The PC3s are only $470 delivered from Oz..
Thats pretty cheap. I was going on latest NZ pricing. I used to get them ex USA when our dollar was better and split the savings with the customer, but now they are over $400 NZ I end up paying gst so advise people to buy their own if they want to save $$. Less hassle for me, had 2 power commanders go tits up in the last year and customers had to sort it out with supplier. No problem with replacements, just time consuming and a few dollars for freight.

Anyway Teka Tuner we charge $50 plus $240 dyno time. $290 all up. (TPS adjustment extra)
Same goes for any fuel-injected Suzuki (not the RMs) and Cagiva with Suzuki engines.
The teka tuner plugs into the ECU and enables us to adjust the factory maps. The same deal as the factory tool.
We can also "tweak" the maps without the dyno time if you know what you need.
cheers

[Dave Lobster]

That's not bad.. I'm tempted to go for one of the Motty boxes when they're plug and play. They're close to a grand.. but no fannying about when I change the cam too. :)

Still... $290 isn't bad :)

[Dave Lobster]

Is there a date lined up for the dyno day yet? My 205 is now running :)

[insane1]

the burger is just starting to run fine with the yoshi,would be good to see what power it has now.

[NSR-Dan]

i wonder how powerful you could get a 50cc scooter (fully engineered with lots of go fast bits) would be interesting


Will see when mine is finished, im just playing around with the jetting now to get the right combination. my build is on the scooter review website.

[ICE180]

will try and orginise in the next week for another day

[Dave Lobster]

Any movement on this?

Stew's got his RT running now. And I know of another GP newly in one piece. That's three.. :)

[ICE180]

Bloody work has got in the way latley so I will call them now
Called but Gavin has left
so if any one knows a dyno that can do scooters let us know

[Spearfish]

Bloody work has got in the way latley so I will call them now
Called but Gavin has left
so if any one knows a dyno that can do scooters let us know

have things changed at hsn Yamaha?

[ICE180]

must of he has gone

the new dyno guys is a contractor who comes in when needed...

[Dave Lobster]

Who was the other fella that someone suggested on here?

When my 185 needed doing, it was in a box still, as he'd moved.

I'd have a look myself, but there's heaps downloading and my internet is slower than a tortoise.

He did Matt C's bike and possibly Ryan's I think.

[ICE180]

I will call him and see if he can do a dyno day

its lincoln he used to run R & R power sports

[Spearfish]

Will see when mine is finished, im just playing around with the jetting now to get the right combination. my build is on the scooter review website.

14-16 out of 50cc 19hp out 70
http://www.scooter-attack.com have hp curves for different setups

[motorbyclist]

I'd be keen to dyno my H100 for a laugh - should have her run in and ready by mid-december