Mudflaps

2nd coat of f/glass applied today. Has hardened perfectly. Quiet bumpy though from the mesh mould. Will probably use it on the Tape Worm and make a card board mould for 'NANOOK'. Found that soaking the pieces of f/glass in the resin got the best results, but only two or three at a time otherwise it goes all goopy and weird. Still, pretty good for a first go. Used 4/5ths of a half litre bottle of resin for two and a half layers of the seat. Used more than I thought, but as long as it works then I ...

So the plan goes like this...

Late 90's KR150 frame, being cut down for weight and new shaping. Has standard forks and rims (18"rear & 16" front), but will look to put 17" rims on. 15 month old Loncin 150 engine to be transplanted. Racing CDI unit but to be later replaced with home made (by Bert) programable unit. Standard KR rear brake caliper, with front to be sourced. Home made fairings and seat/cone. Home made hangers with standard gearing, not race shift. Colour yellow and called ...