Rg150 piston change

[7mmWSM]

According to the service manual there should be a washer on either side of the little end bearing.
When I pulled the old piston out it had no washers installed.
Whats other peoples thoughts on this who have rebuilt these bikes before and which way is rite?

[Rcktfsh]

Sounds like your manual may have been upside down as the washers your referring to will be the thrust washers either side of the big end bearing.

[7mmWSM]

Sounds like your manual may have been upside down as the washers your referring to will be the thrust washers either side of the big end bearing.

As I said Little end bearing at the piston end. I have never seen washers fitted on any other 2 stroke I've rebuilt but it does show them installed in the service manual but none were installed when I disassembled the motor.

[koba]

Some do, some dont. I don't know why.
The washers are available from your local suzuki dealer.
I cant remember the price for sure but will post up what I paid when I get home if I remember.