Results 1 to 10 of 10

Thread: Gt250R front fork swap?

  1. #1
    Join Date
    31st May 2009 - 17:49
    Bike
    08 Hyosung GT250R
    Location
    USA
    Posts
    4

    Arrow Gt250R front fork swap?

    Hmm just a question to throw out to all you knowledgeable people out there.

    I recently bought a 08 GT250R from a squid that spilled it and hit the front end into a wall with less than 1.2k on the bike. Sold it to me for 1k USD. It was in storage for almost 9 months.

    Did an assessment of the bike, not too bad. Tranny and engine is fine, Clutch lever is snapped, shifter knob is completely sheared off. Bent front forks. Other than cosmetic damage thats the brunt of it.

    My question is this, is there any possibility to swap out the front forks/tubes from a different model/make bike? I know that Hyosung manufactures the engine for the Suzuki SV, but can I swap those forks in? The measurements for the forks is 41mm inverted.

    The reason im asking this is because the dealers here want to charge me 800 for two new tubes!

    Btw this is my second fixer motorcycle, my first one was a 96 Suzuki GSX600F Katana

    Thanks in advance.

  2. #2
    Join Date
    25th January 2007 - 21:37
    Bike
    2011 ER-6N
    Location
    Glenfield
    Posts
    2,888
    You should probably search/ask on a Hyosung forum.
    Like http://korider.com/
    I do know that they are USD forks so that'd be the first consideration...

  3. #3
    Join Date
    5th February 2008 - 13:07
    Bike
    2006 Hyosung GT650R
    Location
    BOP
    Posts
    7,141
    Well of course there are used GT250R forks for africa here in NZ, but thats no use to you.

    Even importing them direct from Korea is going to be around US$800 plus freight.

    I cannot see why you could not swap other forks onto it. The distance and angle from the axle to the triple tree must be as close as you can get it. You don't need any less trail, as the steering is twitchy enough on this bike as it is.

    I would transplant the whole lower front - forks, brakes, wheel, etc.

    Good luck, and do let us know how you get on.

    Steve
    "I am a licenced motorcycle instructor, I agree with dangerousbastard, no point in repeating what he said."
    "read what Steve says. He's right."
    "What Steve said pretty much summed it up."
    "I did axactly as you said and it worked...!!"
    "Wow, Great advise there DB."
    WTB: Hyosung bikes or going or not.

  4. #4
    Join Date
    31st May 2009 - 17:49
    Bike
    08 Hyosung GT250R
    Location
    USA
    Posts
    4
    Lol, thanks for the heads up, btw i live in the United States...

  5. #5
    Join Date
    25th January 2007 - 21:37
    Bike
    2011 ER-6N
    Location
    Glenfield
    Posts
    2,888
    Well aren't you a silly person then?

  6. #6
    Join Date
    31st May 2009 - 17:49
    Bike
    08 Hyosung GT250R
    Location
    USA
    Posts
    4
    Well nobody here knows anything remotely about Hyosungs... Even all five dealerships I called were hella confused. Seems as though you people have your heads on straight so I decided to give it a try

  7. #7
    Join Date
    25th January 2007 - 21:37
    Bike
    2011 ER-6N
    Location
    Glenfield
    Posts
    2,888
    They're on far too straight to buy a Hyosung.
    Nah a lot of us have them, we just make sure we completely destroy them when we crash.

  8. #8
    Join Date
    31st May 2009 - 17:49
    Bike
    08 Hyosung GT250R
    Location
    USA
    Posts
    4
    Lol, thanks for that idea

  9. #9
    Join Date
    10th December 2008 - 07:39
    Bike
    07 fz6n. 07cbarrrr600
    Location
    STRAYA
    Posts
    2,041
    Blog Entries
    20
    Get a Perm !!!
    Quote Originally Posted by sil3nt View Post
    Fkn crack up. Most awkward interviewee ever i reckon haha.

  10. #10
    Join Date
    20th December 2007 - 22:18
    Bike
    Hyoslag
    Location
    Wellington
    Posts
    168
    Quote Originally Posted by gatch View Post
    Get a Perm !!!
    She knows what she's talking about.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •