hey guys , got my first bike today . suzuki rg150 1998 . it wont start . i was told it is the cdi ! how to fit it? any help would be much appericiated !!!thanks in advance !!
L-Plate Rider
hey guys , got my first bike today . suzuki rg150 1998 . it wont start . i was told it is the cdi ! how to fit it? any help would be much appericiated !!!thanks in advance !!
gypsy
check you have fuel...(on reserve?)
check there is a spark ...
DO THIS FIRST!!>>>>>>check you have your kill switch ON...<<<<<
what a ride so far!!!!
Double shot!!
The CDI just plugs in. Get another one and swap it over.
Steve
"I am a licenced motorcycle instructor, I agree with dangerousbastard, no point in repeating what he said."
"read what Steve says. He's right."
"What Steve said pretty much summed it up."
"I did axactly as you said and it worked...!!"
"Wow, Great advise there DB."
WTB: Hyosung bikes or going or not.
Blowin up bikes since ages ago
hehe, make sure that your kills switch is OFFOriginally Posted by ajturbo
Also check that your fuel tap is on after checking petrol.
If all else fails then jump start it. If that fails change the spark plug. If all else fails then give up and drink beer.
"Some people are like clouds, once they fuck off, it's a great day!"
Whip it, whip it good!
Was it going when you got it?
is early on the brakes
whip the tank off and pull the spark plug out, while its still in the spark lead, hold the plug close to the head of the motor and kick the starter a few times. might help if two people do it. if theres no spark it could be a wiring problem (start from the ignition)
when i had this problem on my old rg it turned out to be a dodgy terminal block coming from the ignition
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks