MC19 vs MC22 handle bars

[limmy]

Hi guys,
I've bent the handle bar on my CBR250RR MC22. Does anyone know if the handle bars are the same on all the different version of 250RRs?

Thanks.

[Sniper]

Not generally but always pays to ask

[Mr Skid]

Limmy, I parked my heavily modified MC19 next to a MC22 at uni today to check this.

The MC19 clipons attach above the top triple clamp, and have a longer sleevey bit wot attaches to the shiny metal pipe that holds the wheel on, whereas the MC22 clipons attach below the top triple clamp and have a longer sleevey bit.

Also the MC19 clipons have a small finger of sorts that seats in the top triple clamp that prevents them rotating around the shiny metal pipe, I'm guessing that a MC22 clipon would have this on the top rather than the bottom.

If you want to have a look at my bike for further comparisons let me know.

[limmy]

Limmy, I parked my heavily modified MC19 next to a MC22 at uni today to check this.

The MC19 clipons attach above the top triple clamp, and have a longer sleevey bit wot attaches to the shiny metal pipe that holds the wheel on, whereas the MC22 clipons attach below the top triple clamp and have a longer sleevey bit.

Also the MC19 clipons have a small finger of sorts that seats in the top triple clamp that prevents them rotating around the shiny metal pipe, I'm guessing that a MC22 clipon would have this on the top rather than the bottom.

If you want to have a look at my bike for further comparisons let me know.

Thanks for the detail analysis. But the short answer was "no" then