RVF400 owners - Got a tape measure.

[lostinflyz]

if you own a rvf400 and have a tape measure can someone do me a favour and measure the length of your forks (from the top cap of the fork to the centre of the axle (should be able to get it within a mm or two)

and can you tell me the exposed length through the top clamp (should only be a few mm) on your bike.

Just trying to setup some new forks back to roughly stock settings. thanks for someones help.

[lostinflyz]

any one help?? -

by the way you'll need to jack the front off the ground to measure free length.

please someone - anyone????/

[Robert Taylor]

if you own a rvf400 and have a tape measure can someone do me a favour and measure the length of your forks (from the top cap of the fork to the centre of the axle (should be able to get it within a mm or two)

and can you tell me the exposed length through the top clamp (should only be a few mm) on your bike.

Just trying to setup some new forks back to roughly stock settings. thanks for someones help.

Do what we do and try at different protrusions. If it still has stock springs and damper rods its going to blow through its stroke anway under brakes. So Id start at setting them flush.