ZXR vacuum valve - Help!

[fricks]

Fitting a vacuum valve to my ZXR250c and im unsure on where two of the hoses on it are supposed to hook up to. They are hoses A and D in the photo below:

http://i21.photobucket.com/albums/b2...cuum_valve.jpg

The carbs have two vacuum nipples on the top/front side (facing steerer tube) that have no hoses on them and was wondering if hose A is supposed to hook into these via a T fitting?

As for hose D, im not really to sure.

If any ZXR owners out there could quickly whip their tank off for me and check would be much appreaciated!

[skidMark]

I knw one goes to nothing, ill goto the lock up and whip the tank off my zxr today and take a couple of pics and note how it goes... hopefully i will have time...

Skid.

[fricks]

^^ Cheers mate

[fricks]

Is anyone able to offer some help with this? cheers

[skidMark]

Is anyone able to offer some help with this? cheers

i pm'ed u back dude

[skidMark]

A goes to nothing

D goes down left side of bike (clutch side) with a twin hose that hooks onto the vacuum ines hanging off the intake manifolds under the carbs... you will see 2 hose one linking cyl 1 and 4, the other linking cyl 2 and 3. hook it into that, ...D is the smallest nozzle on the entire unit and shuld face straight down