Results 1 to 5 of 5

Thread: Importing race bike

  1. #1
    Join Date
    11th September 2008 - 22:59
    Bike
    1994 MotoGuzzi California 111 LAPD
    Location
    Alexandra, Central Otago
    Posts
    258

    Importing race bike

    We've finally decided to return to NZ (early Dec.) and I will be shipping my bikes over as well.
    I think I've managed to get the info about my road bikes, but can anyone give me the low down on the hoops I will have to jump through bringing my purpose built Top Gas class drag bike in.
    I know that MAF will want it clean, no problem as it's never been on road or out in the rain!
    But how about Customs - I have built this bike myself and don't have any receipts for most of it!
    Any info appreciated.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	16-37-31-O-S-NATS-2009-08-21-1022.jpg 
Views:	19 
Size:	474.4 KB 
ID:	139894  

  2. #2
    Join Date
    13th April 2005 - 12:00
    Bike
    Enfield cr250r
    Location
    Tokyo
    Posts
    3,415
    Blog Entries
    3
    Quote Originally Posted by Supertwin Don View Post
    We've finally decided to return to NZ (early Dec.) and I will be shipping my bikes over as well.
    I think I've managed to get the info about my road bikes, but can anyone give me the low down on the hoops I will have to jump through bringing my purpose built Top Gas class drag bike in.
    I know that MAF will want it clean, no problem as it's never been on road or out in the rain!
    But how about Customs - I have built this bike myself and don't have any receipts for most of it!
    Any info appreciated.
    Dont worry about cleaning it ... Just sell it there , You would be competing against my Enfield ,,, so there isnt much point in bringing it

    but there is a web site

    snip

    All used light vehicles entering New Zealand for the first time must go through the following process before they can be used on the road.

    This procedure is the same whether the vehicle is imported for sale or for the personal use of the owner.

    Step 1: Vehicle arrives in New Zealand
    The vehicle goes through a Ministry of Agriculture and Forestry (MAF) quarantine inspection on the wharf. A border inspector also checks the vehicle (called the 'border check') and records the following details:

    - the vehicle's identity (ie, VIN/chassis number, make, model)
    - the identity of the importer of the vehicle
    - the odometer reading at the time of the check
    - any obvious significant damage or deterioration (damage that is merely cosmetic will not be recorded)
    - whether the vehicle is right-hand drive or left-hand drive.
    - MAF send the information to the Transport Registry Centre (part of Land Transport NZ) for recording on the LANDATA database. You should allow 48 hours for the information to be recorded. (This information is needed to register the vehicle.)

    MAF invoice the importer for each vehicle, to cover the cost of the border check and quarantine inspection.

    What happens if the vehicle is damaged or deteriorated?
    If the vehicle is identified by MAF as being structurally damaged or deteriorated, this is recorded on LANDATA and a label is put on the vehicle to show it is structurally damaged. You might decide repairs are not justified and look for alternative uses for the vehicle — eg, for parts.

    What happens after the border check?
    After the border check, the vehicle must clear Customs. The New Zealand Customs Service holds the vehicle until all Customs requirements are met. Contact Customs for details and costs.

    After clearing Customs, the vehicle is released to the importer.

    Dealers and repairers who have the right to use a trade plate may drive an uncertified vehicle on a conditional permit (an 'Annex B') before taking it to an entry certifier.
    If you're a private importer, however, you will need to have the vehicle transported to an entry certifier by other means (eg, on a trailer, transported or towed). This is because you cannot drive it on the road until it has passed the entry certification, registration and licensing process and been issued with a WoF.
    Entry certifiers are not available in every part of New Zealand.

    - Some vehicles may be classed by Customs as prohibited imports (eg, because of tampering with the odometer). As a condition of import approval, Customs may impose a requirement that the vehicle be sold for parts. If this happens, the vehicle cannot be registered for use on the road.

    Step 2: Vehicle reaches an entry certifier
    If the vehicle already has a VIN when it enters New Zealand, the VIN is decoded by the entry certifier. It is the vehicle owner's responsibility to provide the information (available from the vehicle manufacturer) that enables the VIN to be decoded.

    If the vehicle doesn't have a VIN, it is verified through other vehicle identifiers (such as the chassis number) and the entry certifier issues it with a VIN.

    The VIN is recorded on LANDATA so the vehicle can be tracked through the certification and registration process. The entry certifier then starts to certify the vehicle for registration.

    Step 3: The certification process
    The entry certifier checks the documents that prove the vehicle meets the necessary legal requirements (see Infosheet 1.67) and also thoroughly inspects the vehicle. The vehicle may need some work done on it to ensure it complies with New Zealand law.

    If the vehicle complies with all the legal requirements, the entry certifier issues form MR 2A (Application to register a motor vehicle). The entry certifier invoices the importer for the cost of certification.

    What is the certification process for structurally damaged or deteriorated vehicles?
    Structural damage or deterioration to a vehicle may have been recorded at the border check or could be discovered later, by the entry certifier. The vehicle may need to be repaired before it can be certified for registration.

    The entry certifier is responsible for deciding whether a specialist repair certifier needs to inspect any repairs that were carried out before the vehicle was imported, to ensure they have been done correctly. This could involve some disassembly and additional costs for you. You will need to pay the costs of repair and repair certification, as well as the cost of entry certification.

    A vehicle that is so severely damaged that it is unsuitable for registration, or has been badly repaired, will not be given a repair certificate or form MR 2A. It will be released to you and may not, by law, be registered or driven on the road in New Zealand until it meets all legal requirements.

    Modified vehicles
    If a light vehicle is significantly modified, the entry certifier must send it to a low volume vehicle (LVV) certifier for specialist certification. There will be a charge to you for this, in addition to the cost of entry certification. The LVV certifier will inspect the vehicle and issue it with a modification plate before it is returned to the entry certifier.

    Is a separate WoF or CoF inspection necessary?
    No. A light vehicle that is certified for registration is automatically entitled to a warrant of fitness (WoF) or certificate of fitness (CoF). The WoF or CoF will run from the certification date.

    Step 4: After certification
    When the vehicle has been certified (ie, when the MR 2A has been issued), you may register and license it so it can be driven legally on New Zealand roads.

    If the vehicle is not registered within two years, its entry certification will lapse and it will need to be reinspected and recertified before it can be registered and licensed.

    any help?

    Stephen
    "Look, Madame, where we live, look how we live ... look at the life we have...The Republic has forgotten us."

  3. #3
    Join Date
    11th September 2008 - 22:59
    Bike
    1994 MotoGuzzi California 111 LAPD
    Location
    Alexandra, Central Otago
    Posts
    258
    All used light vehicles entering New Zealand for the first time must go through the following process before they can be used on the road.

    Thanks for the response, I've already seen the LTNZ website, and the crucial bit is in red above - I can't find anything that details any procedure for a non-road use vehicle.

    The bike does not have a chassis / VIN number, speedometer, make/model designation.

  4. #4
    Join Date
    12th May 2006 - 08:40
    Bike
    07 gxsr1000
    Location
    whangarei
    Posts
    226
    Put that same post on www.dragbikenz.com some of the guys there will know as they have already been through it, may have to get it valued etc for gst,but l can't see any problems bring in a race bike ,it's not for the road
    I WISH THE REAL WORLD WOULD JUST STOP HASSLING ME !!!

  5. #5
    Join Date
    13th April 2007 - 17:09
    Bike
    18 Triumph Tiger 1050 Sport
    Location
    UK
    Posts
    3,802
    I spoke with a compliance officer about this a couple of years back and he said that, provided the bike is not going to be used on the road, there are no compliance requirements. All you need to do is make sure it is 'superclean', especially underneath and also inside any mudguards or recesses.

    Just clean parts, rather than as a complete vehicle, would be even better.

    Also, don't forget to drain all of the fuel.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •