Sorry, but at least 50% of that sounds like a load of hogwash.
Pull your stator cover off and see for yourself. I'd put money on all your wiring being in great order, and there being one tiny fault to ground inside one of the windings causing all the problems. You MIGHT get away with just removing the faulty winding and replacing it, but I'd be tempted to rewind the whole thing.
You should at least do some basic continuity checks and insulation checks. Two minutes with the tester will tell you all. If you meter doesn't read down to low ohms, you might have to unsolder the star connection to isolate which winding is at fault.
Steve
"I am a licenced motorcycle instructor, I agree with dangerousbastard, no point in repeating what he said."
"read what Steve says. He's right."
"What Steve said pretty much summed it up."
"I did axactly as you said and it worked...!!"
"Wow, Great advise there DB."
WTB: Hyosung bikes or going or not.
Bookmarks