Page 1 of 2 12 LastLast
Results 1 to 15 of 23

Thread: kk can you help my vfr??

  1. #1
    Join Date
    28th March 2005 - 12:47
    Bike
    93 VFR400R nc30
    Location
    Wellington
    Posts
    29

    kk can you help my vfr??

    Racing my vfr 400nc30 and i hear and read that you kk are the most absessed man out there!!
    I got 8 days till i take over da world....ah hem i mean compete in da Vic club champs, Manfeild 23/4.
    Is there anyone out there that can help or is it too late.........


    On a more serious note my vfr has had alot of mods and was wondering if anyone had any good tips on stuff to make her better!

  2. #2
    Join Date
    12th February 2004 - 12:00
    Bike
    08 ZX-6R Race Bike, FXR150
    Location
    Auckland
    Posts
    4,913
    Quote Originally Posted by vfr dan
    Racing my vfr 400nc30 and i hear and read that you kk are the most absessed man out there!!
    I got 8 days till i take over da world....ah hem i mean compete in da Vic club champs, Manfeild 23/4.
    Is there anyone out there that can help or is it too late.........


    On a more serious note my vfr has had alot of mods and was wondering if anyone had any good tips on stuff to make her better!
    What do you need help with??? Whats the mods???

    And a side note.... whats the times need to know the people that are going to beat me (which is everyone) but by how much...
    See Robert Taylor for any Ohlins requirements www.northwest.co.nz
    Thanks Colemans Suzuki
    Thanks AMCC
    I use DID Chains and Akrapovic Exhausts

  3. #3
    Join Date
    28th March 2005 - 12:47
    Bike
    93 VFR400R nc30
    Location
    Wellington
    Posts
    29
    Times....? if i told you i would have to kill you..... nah sweet man.Im running in f3 sameas you i spose and do a comfortable 1.22-23 short trak normal direction. Long track...? bout 2.15, the long trak adds about a min to what you get normally.
    My VFR has a had a shit load done! Everything you could think off except for a big bore kit. Polished conrods and crank, 17" rim, hrc carb kit, shit loads!
    Im a bit worried of the competition i think and kk could help or anyone.

    Shes a hot little no you'll see her out in action.

  4. #4
    Join Date
    13th January 2004 - 11:00
    Bike
    Honda PC800
    Location
    Henderson -auckland
    Posts
    14,163
    Methinks I smell a big fat rat here. Could said viffer perhaps be the same bike that blitzed F3 at Taupo recently?
    Dude my serious suggestion to ya is put ya wallet away. Just make sure she runs reliably and the brakes etc all work propperly.
    The biggest chunk of time you'll grind off will be by getting yourself tuned into the bike and getting ya "race face' on.
    Trust me i know this --i went the other way --what a friigin waste of time
    To see a life newly created.To watch it grow and prosper. Isn't that the greatest gift a human being can be given?

  5. #5
    Join Date
    12th February 2004 - 12:00
    Bike
    08 ZX-6R Race Bike, FXR150
    Location
    Auckland
    Posts
    4,913
    Quote Originally Posted by XJ/FROSTY
    Methinks I smell a big fat rat here. Could said viffer perhaps be the same bike that blitzed F3 at Taupo recently?
    Dont you mean Jason Hulme???
    See Robert Taylor for any Ohlins requirements www.northwest.co.nz
    Thanks Colemans Suzuki
    Thanks AMCC
    I use DID Chains and Akrapovic Exhausts

  6. #6
    Join Date
    28th March 2005 - 12:47
    Bike
    93 VFR400R nc30
    Location
    Wellington
    Posts
    29
    i been folowing in jases foot steps, when i got into racing he was the first person to help me out. He's moving to f2 and i wana move up and take on his place, i know im good enough but im finding it hard to "go hard".

  7. #7
    Join Date
    12th February 2004 - 12:00
    Bike
    08 ZX-6R Race Bike, FXR150
    Location
    Auckland
    Posts
    4,913
    Quote Originally Posted by vfr dan
    i been folowing in jases foot steps, when i got into racing he was the first person to help me out. He's moving to f2 and i wana move up and take on his place, i know im good enough but im finding it hard to "go hard".
    Gutted, will have to wait till later in the year until i can race him

    So are you riding his bike???
    See Robert Taylor for any Ohlins requirements www.northwest.co.nz
    Thanks Colemans Suzuki
    Thanks AMCC
    I use DID Chains and Akrapovic Exhausts

  8. #8
    Join Date
    28th March 2005 - 12:47
    Bike
    93 VFR400R nc30
    Location
    Wellington
    Posts
    29
    AH nah.....ive got my own bout a fraction quicker maybe.
    his as might know ended up in a heap at wangas 26/12/04, flood crashed into the hay over the train tracks and he caught the back end of him, broke his wrist.
    He sold the bike, and is looking for a gsxr6, hes got some in mind.
    As for me im riding my vfr and looking to make amends for the poor season last.
    Looking forward to it 2smoker?

    Currently at the mo im fitting my rear suspension after a mod and rebuild, still got dirty hands......can get the thing to run tho, she hasnt run for a while and is always a bit slow of the mark. Ill get there.
    You guys doin Taupo 8/5?
    I want to get up there but there is track training at Manfeild, but i would like to sample the smaller track, knee down action i hear?
    Well see well see. Be good to meet some of you boys when i go round the outside of you at the sweeper at manfield...

    Nah sweet as guys well be good aye!

  9. #9
    Join Date
    9th July 2004 - 12:34
    Bike
    KTM300EXC
    Location
    Porirua
    Posts
    493
    Quote Originally Posted by Two Smoker
    Gutted, will have to wait till later in the year until i can race him
    TS I tried to keep up with that Hulme fulla last time he was at Raupo.....FECK! He's quick. I had not a hope. If you can beat him I might have to hang up my gloves + lid and sponsor ya

  10. #10
    Join Date
    12th February 2004 - 12:00
    Bike
    08 ZX-6R Race Bike, FXR150
    Location
    Auckland
    Posts
    4,913
    Quote Originally Posted by That Guy
    TS I tried to keep up with that Hulme fulla last time he was at Raupo.....FECK! He's quick. I had not a hope. If you can beat him I might have to hang up my gloves + lid and sponsor ya
    ]

    My times around Taupo are the same as his... At Pukekohe he is a little quicker than me, but im working on it... i think i know where i can make up a second to match his times...

    As for manfield ive only done shitty times... 1:22's and 1:21's... But hopefully i will get into the 1:19's.. But this race next weekend is the full track...

    But meh, im slow, i expect to be at the back, so no worries about you hanging up your gloves and lid mate...
    See Robert Taylor for any Ohlins requirements www.northwest.co.nz
    Thanks Colemans Suzuki
    Thanks AMCC
    I use DID Chains and Akrapovic Exhausts

  11. #11
    Join Date
    12th February 2004 - 12:00
    Bike
    08 ZX-6R Race Bike, FXR150
    Location
    Auckland
    Posts
    4,913
    Quote Originally Posted by vfr dan
    Looking forward to it 2smoker?

    I want to get up there but there is track training at Manfeild, but i would like to sample the smaller track, knee down action i hear?
    Well see well see. Be good to meet some of you boys when i go round the outside of you at the sweeper at manfield...
    Yeah mate first proper race at manfield!!!

    Knee down action??? Thats at every track mate.....

    Just remember the bullshit stops when the flag drops....
    See Robert Taylor for any Ohlins requirements www.northwest.co.nz
    Thanks Colemans Suzuki
    Thanks AMCC
    I use DID Chains and Akrapovic Exhausts

  12. #12
    Join Date
    7th February 2003 - 12:00
    Bike
    Not many, if any
    Location
    Earth
    Posts
    2,153
    Hmmm... Who are you vfr Dan?

    And why would you want ME to go anywhere near such a sorted bike?.. I only make them worse

  13. #13
    Join Date
    19th November 2003 - 18:45
    Bike
    KTM 690 DUKE R
    Location
    Auckland - unavoidably...
    Posts
    6,422
    Quote Originally Posted by Kwaka-Kid
    Hmmm... Who are you vfr Dan?

    And why would you want ME to go anywhere near such a sorted bike?.. I only make them worse
    thats not what i want to hear KK, cheers though for sorting that shit out!

  14. #14
    Join Date
    13th August 2004 - 20:45
    Bike
    Gixxer
    Location
    Palmy
    Posts
    3,632
    Quote Originally Posted by Kwaka-Kid
    Hmmm... Who are you vfr Dan?

    And why would you want ME to go anywhere near such a sorted bike?.. I only make them worse

    Hes just trying to suck up to all the vfr owners.
    And dan...
    YOU NEED TO SORT OUT YOUR STARTS BEFORE ANYTHING ELSE ME THINKS!!!
    Motorcycing is not a hobby, It is a way of life!

    Missed forever! NEVER FORGOTTEN!!
    LIVE ON MY FRIENDS!

    Friends dont let friends ride Hyosungs

  15. #15
    Join Date
    26th August 2004 - 16:07
    Bike
    '07 CBR1000RR
    Location
    Waikanae
    Posts
    592
    my personal advice (goes with all hondas) is to open the gas tap and put a match down it!!
    yeah... sorry bro, i thought that ment miles 'n hour.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •