ginny250 starter clutch

[fridayflash]

hi all, im after a gn250 starter clutch pack which is fixed to the rear off
the flywheel...also need the corresponding ring gear.
tate35's starter has been making horrific wizz-bang-clunk! noises
and occasionaly engages long enough to start from cold,
upon deeper inspection this whole unit is shot (should be shot)
so hope to find someone with a parts motor
cheers

[CeeBee]

Have you looked in Trade me and / or posted a wanted, probably get something there.

[Squiggles]

I've got 2, maybe 3 engines that're in pieces...

[KiwiGs]

I have a starter clutch, but I am not sure what it is off. It is a zook one though.
If you cant find anything else, shoot me some measurements and if it will work you can have it for the cost of its ride up there....

[fridayflash]

Have you looked in Trade me and / or posted a wanted, probably get something there.

yep...done both, cheers matey

[fridayflash]

I've got 2, maybe 3 engines that're in pieces...

kool! ill pm you, cheers

eddie

[fridayflash]

I have a starter clutch, but I am not sure what it is off. It is a zook one though.
If you cant find anything else, shoot me some measurements and if it will work you can have it for the cost of its ride up there....

cheers for the offer kgs..awesome! ill follow up a couple of other leads
ive got at the mo...failing that ill remove it again and measure it...
i put it back together so it could be ridden over the weekend hehe
(pushstart from cold..button start when warm)
thanks again
eddie

[mahon]

Hi, I've got 2 gn engines for spares - one is in a box with all gears and crankshaft removed/loose, however I'm not a mechanic so not sure how it looks. This link may help if you point it out me...
http://www.cmsnl.com/suzuki-gn250-19...366/partslist/

You've asked me this on Trademe as well.

Cheers
Alex

[fridayflash]

hi mahon...ive looed in your fiche file and its listed as 'starter clutch' in there and is a disc shape unit bolted to rear of magneto..it has springs and three cylinder shaped bearings in it...also needed is the larger wheel gear which
sits behind it.
if needed i could ph you regarding it...thanks for your help
eddie