Results 1 to 13 of 13

Thread: New shoes?

  1. #1
    Join Date
    9th June 2009 - 08:23
    Bike
    76 HONDA XL125
    Location
    SOUTHLAND
    Posts
    1,004

    Question New shoes?

    The jog has just done 8000ks and is running on a nearly slick rear tyre. The standard Cheng Shin rubber was shyt in the wet but good if the tar was hot.
    Cycletreads is probably the best place to go but I want to know if anyone has fitted wider tyres to the rear of a Jog?
    Standard are 90/90 front and back.
    Will 100/90 fit without hitting the shock? In 10in they go to 130/70
    I'm looking at Michelin S1's front and back.
    Any advice from those in the know will be greatly appreciated.

  2. #2
    Join Date
    10th May 2009 - 15:22
    Bike
    2010 Honda CB1000R Predator
    Location
    Orewa, Auckland
    Posts
    4,490
    Blog Entries
    19
    Be carefull changing to wider tyres. It's not like a car. The handling of the bike may not improve.

  3. #3
    Join Date
    26th January 2007 - 10:27
    Bike
    your mum
    Location
    Beachlands
    Posts
    2,545
    Blog Entries
    3
    its a scooter, just get a big bore kit

    MFSC lives on!

  4. #4
    Join Date
    1st March 2007 - 07:37
    Bike
    Vespa GT200, LML Vespa 130, Honda NXR125
    Location
    Hillsborough in the 09
    Posts
    426
    Quote Originally Posted by Spearfish View Post
    The jog has just done 8000ks and is running on a nearly slick rear tyre. The standard Cheng Shin rubber was shyt in the wet but good if the tar was hot.
    Cycletreads is probably the best place to go but I want to know if anyone has fitted wider tyres to the rear of a Jog?
    Standard are 90/90 front and back.
    Will 100/90 fit without hitting the shock? In 10in they go to 130/70
    I'm looking at Michelin S1's front and back.
    Any advice from those in the know will be greatly appreciated.
    I guess the biggest thing is what will fit width ways with out rubbing against anything. So long as it doesn't rub you should be alright.

    Tyres are all about compromise. The softer the compound the greater the grip, the faster the wear. Hard compound, alot of wear but little performance. Remember: the more tyre contact with the ground = more friction (bad for speed) and more grip (good for cornering).

    IMHO - go big, go to Cycletreads, buy it and do it yourself.
    Quote Originally Posted by Timmay View Post
    goes like a whore on P

  5. #5
    Join Date
    5th August 2005 - 13:36
    Bike
    '69 Lambretta & SR400
    Location
    By the other harbour.
    Posts
    707
    If you google spelling tyre like the septics do ie "tire" *spit* then...

    http://www.provoscooter.com/forum/sh...d.php?p=134127

    It appears that you can get up to a 3.5" boot on the back no probs...go for it.
    Quote Originally Posted by Dave Lobster View Post
    Only a homo puts an engine back together WITHOUT making it go faster.

  6. #6
    Join Date
    9th June 2009 - 08:23
    Bike
    76 HONDA XL125
    Location
    SOUTHLAND
    Posts
    1,004
    Quote Originally Posted by UberRhys View Post
    I guess the biggest thing is what will fit width ways with out rubbing against anything. So long as it doesn't rub you should be alright.

    Tyres are all about compromise. The softer the compound the greater the grip, the faster the wear. Hard compound, alot of wear but little performance. Remember: the more tyre contact with the ground = more friction (bad for speed) and more grip (good for cornering).

    IMHO - go big, go to Cycletreads, buy it and do it yourself.
    Quote Originally Posted by p.dath View Post
    Be carefull changing to wider tyres. It's not like a car. The handling of the bike may not improve.
    Quote Originally Posted by Sidewinder View Post
    its a scooter, just get a big bore kit
    Cheers for that. I think I will stay with the 90/90 considering the hight of the tyre is 90% of the width so I cant be bothered working out other tyre ratios.
    The S1 tyres are ex wet race tyres so should be a way better compound than the standard but shorter lived.

    As far as the big bore kit goes, its definitely in the near future plans I'm looking for more acceleration rather than top speed, no moped will outrun "Boi, I wish my nuts would drop, Racers" if they want to "play" at 3am. I'm just watching a few others with kits fitted to if I can stay away from premix but its looking like leaving the yam oil pump and pre mixing at 100 to 1 for insurance I just have to make my mind up before re jetting the carb.

  7. #7
    Join Date
    5th August 2005 - 13:36
    Bike
    '69 Lambretta & SR400
    Location
    By the other harbour.
    Posts
    707
    Of course, the other option is the same tyre on a wider rim - that's what I've done on my Lammy and it really improved the behaviour. With a scooter you've got much more of the weight distributed to the rear wheel so a bigger contact patch is all good.
    Quote Originally Posted by Dave Lobster View Post
    Only a homo puts an engine back together WITHOUT making it go faster.

  8. #8
    Join Date
    15th February 2008 - 17:07
    Bike
    Suzuki UZ125
    Location
    Auckland
    Posts
    146
    don't worry about sizes, just go get some conti twists and be done with it. They are great and I would say better than the Michellins for day to day use.

  9. #9
    Join Date
    9th June 2009 - 08:23
    Bike
    76 HONDA XL125
    Location
    SOUTHLAND
    Posts
    1,004
    Quote Originally Posted by Del Fuego View Post
    don't worry about sizes, just go get some conti twists and be done with it. They are great and I would say better than the Michellins for day to day use.
    Who in auck stocks conti twists?

  10. #10
    Join Date
    24th January 2007 - 09:48
    Bike
    A big one
    Location
    North of the Immigrants
    Posts
    508
    Try Dan in Coleman's.
    It's only when you take the piss out of a partially shaved wookie with an overactive 'me' gene and stapled on piss flaps that it becomes a problem.

  11. #11
    Join Date
    1st March 2007 - 07:37
    Bike
    Vespa GT200, LML Vespa 130, Honda NXR125
    Location
    Hillsborough in the 09
    Posts
    426
    Quote Originally Posted by Spearfish View Post
    Who in auck stocks conti twists?
    Cycletreads are normally pretty good.
    Quote Originally Posted by Timmay View Post
    goes like a whore on P

  12. #12
    Join Date
    4th December 2006 - 19:19
    Bike
    Gilera 180 , ,GB400/650 ,SV650
    Location
    supercity thats the one
    Posts
    259
    the conti twists`that I had developed a split in the rubber after about 2000km on them as though the rubber was coming of the casing

    So for me I will not go near them

    P.s I was not the only person who had this issue

  13. #13
    Join Date
    9th June 2009 - 08:23
    Bike
    76 HONDA XL125
    Location
    SOUTHLAND
    Posts
    1,004
    Quote Originally Posted by ICE180 View Post
    the conti twists`that I had developed a split in the rubber after about 2000km on them as though the rubber was coming of the casing

    So for me I will not go near them

    P.s I was not the only person who had this issue
    Your not the first person to mention faults forming, it seems Monday and Friday tyres are not so good even tho some have no probs at all.
    Scootling are having a sale on this week and Cycletreads have a large variety so best just to fuel up and go for a ride around town.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •