Results 1 to 6 of 6

Thread: Rattle in Gearbox

  1. #1
    Join Date
    30th October 2003 - 08:52
    Bike
    02 R1, 06 KX450F
    Location
    Auckland
    Posts
    134

    Rattle in Gearbox

    Hi Guys,

    I have an 1994 GSXR 750. When i take off at low rev's the gerbox makes a loud rattling / clicking sound. It only does it under load at low revs. And it will do it in any gear.

    I have been told it might be Clutch rattle, but its alot louder and more violent than what people have usually heard...

    Anyone got any other idea's of what i could look at?

    Thanks for the help.


    Arven.

  2. #2
    Join Date
    13th March 2003 - 11:47
    Bike
    2006 Honda XR250L
    Location
    Porirua
    Posts
    7,349
    Is the sound in time with engine revs or road speed and does it change as you change gear?

    I only ever had one bike make clicking sounds and it only did it in third gear because it had lost a tooth off one of the gears used when in third. That only happened because a screw came loose off the stator on the alternator and it ended up going between the gears and getting mulched - bent the mainshaft a bit too and knocked the tooth off.

    So I'm thinking you may have lost a tooth but if its in every gear it would have to be off one of the primary drive gears.

    Does the clutch feel OK? Not slipping or anything? Usually they only rattle under no load when the bike is in neutral and the engine is idling. Except Ducatis with dry cluthces that sound like a loose tin of bolts at the best of times.
    Cheers

    Merv

  3. #3
    Join Date
    20th April 2003 - 08:28
    Bike
    Something red and quick
    Location
    Auckland
    Posts
    2,499
    If you're totally sure it's in the gearbox, try changing the oil and see if it helps.

    If you're not too sure yet, it might just be the cam chain tensioner is out.

    I believe (someone correct me if I'm wrong?) camchain problem noise is more evident in low revs (especially idle), while gearbox problem noise is more evident in high load/rpm.
    Elite Fight Club - Proudly promoting common sense and safe riding since 2024
    http://1199s.wordpress.com

  4. #4
    Join Date
    30th October 2003 - 08:52
    Bike
    02 R1, 06 KX450F
    Location
    Auckland
    Posts
    134
    Naa, I don’t think there is a tooth missing. It does it in ALL Gears, and only when under load. I haven’t noticed if its in time to the engine or anything like that, if I park up, and put the front break on, and start releasing the clutch while in a high gear, it will start to do it really loudly.

    So I'm hoping its going to be a Clutch tensioner or something like that rather than a gearbox problem itself!!

    Yea! Camchain! Now somebody said it sounded like that also! any more info about that i could look into???

    Cheers for the help guys!

  5. #5
    Join Date
    30th October 2003 - 08:52
    Bike
    02 R1, 06 KX450F
    Location
    Auckland
    Posts
    134

    Bike Shops?

    What bikeshops in Auckland do you guys recommend? I have only ever used Mt Eden and they have ripped me off too many times. Anyone recommend any other places???

  6. #6
    Join Date
    20th April 2003 - 08:28
    Bike
    Something red and quick
    Location
    Auckland
    Posts
    2,499
    Originally posted by Arven
    only when under load.
    U sure it's not detonation/knock/ping?

    Btw, Cyclespot is quite nice. I used them for the last 4 years. Have a talk to them.
    Elite Fight Club - Proudly promoting common sense and safe riding since 2024
    http://1199s.wordpress.com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •