Results 1 to 13 of 13

Thread: Plastic welding in Auckland?

  1. #1
    Join Date
    28th January 2008 - 17:41
    Bike
    2010 r6 road, 07 R6 track
    Location
    Auckland
    Posts
    434

    Plastic welding in Auckland?

    I have a spare front cowling for my R6 but the tabs to mount it have broken off and I need then plastic welded.
    Who does this in Auckland
    as this mounts the front headlights etc it will need to be a good strong fix.

    So who does this in Auckland that you recommend.

  2. #2
    Join Date
    13th April 2007 - 17:09
    Bike
    18 Triumph Tiger 1050 Sport
    Location
    UK
    Posts
    3,802
    The Plastic Repair Co. Archers Rd, Glenfield. Tel. 444 5553

    I don't know if they will weld plastic, but they do do a great job of painting it.

    Give them a call to find out.

  3. #3
    Join Date
    4th November 2007 - 13:39
    Bike
    a fucking hornet
    Location
    dunedin
    Posts
    3,022
    not hard at all to weld
    could be a 10 minute job
    do you still have the tabs??
    makes the job a lot easier

    plastic fabricator/welder here if you need a hand ! will work for beer/bourbon/booze

    come ride the southern roads www.southernrider.co.nz

  4. #4
    Join Date
    6th August 2009 - 22:07
    Bike
    Ducati Hypermotard 1100S & Harley FXDB
    Location
    Auckland
    Posts
    2
    I'm looking for an answer to this question too.
    I have a small crack in a fairing slowly getting longer. I don't need it repainted, just wanna stop it getting longer. Probably a 30 second job once the fairing is off, I'd just rather someone who knows what they are doing before i start melting everything and making a mess.

  5. #5
    Join Date
    28th January 2008 - 17:41
    Bike
    2010 r6 road, 07 R6 track
    Location
    Auckland
    Posts
    434
    i had this done by the guys mentioned above the plastic repair company good quick service

  6. #6
    Join Date
    21st July 2005 - 12:00
    Bike
    92 Yamaha FJ1430A
    Location
    Nana Republic
    Posts
    2,543
    Blog Entries
    23
    Evoke bodyworks

    25 hargreaves st
    ponsonby

    -09354 4864




    ask for aaron and tell them sarge sent ya
    Life is tough. It's tougher when you're stupid

    SARGE
    represented by GCM

  7. #7
    Join Date
    15th June 2006 - 13:39
    Bike
    08 CRF 450, 2K RSV-R
    Location
    OREWA
    Posts
    1,357
    I would third the plastic repair company, they have done good work at very resonable prices for me in the past
    XLR8 Racing
    Spectrum Motorcycles
    Computerforce
    Metzler, Maxima oils

  8. #8
    Join Date
    29th April 2007 - 08:01
    Bike
    A Red German one.
    Location
    Wherever my bike is.
    Posts
    873
    Quote Originally Posted by hazza1234 View Post
    I'm looking for an answer to this question too.
    I have a small crack in a fairing slowly getting longer. I don't need it repainted, just wanna stop it getting longer. Probably a 30 second job once the fairing is off, I'd just rather someone who knows what they are doing before i start melting everything and making a mess.
    Just drill a small hole at the end of the crack. It will stop it spreading and getting longer, until you get it fixed.



    "No matter what bike you ride. It's all the same wind in your face"

  9. #9
    Join Date
    7th November 2008 - 22:02
    Bike
    05 CB1300
    Location
    Auckland
    Posts
    301
    Anything Plastic. 6B Newark pl East Tamaki. i had some cracks repaired there good strong fixes.
    lol jus relised this was posted in august lmao.
    "We are not human beings having a spiritual experience. We are spiritual beings having a human experience."

  10. #10
    Join Date
    15th November 2008 - 07:27
    Bike
    vfr400 NC30, SRX600 project
    Location
    Glen Eden, Auckland
    Posts
    1,120
    how much does plastic welding tend to cost?i know that's a horrible question...but say...4 cracks around an inch long...

  11. #11
    Join Date
    7th November 2008 - 22:02
    Bike
    05 CB1300
    Location
    Auckland
    Posts
    301
    i had bout 6 cracks and some bout 3 inches and some 4. cost me $90
    "We are not human beings having a spiritual experience. We are spiritual beings having a human experience."

  12. #12
    Join Date
    7th June 2009 - 14:24
    Bike
    GSX1100
    Location
    Good question. dog box
    Posts
    254
    Don't know about Auckland, but have heard of a guy in Hastings who does a really awesome job..........

  13. #13
    Join Date
    17th July 2009 - 15:26
    Bike
    2006 Suzuki GN250
    Location
    Glenfield Auckland
    Posts
    34
    Call the guys in Archers Rd Glenfield (09 444 5553) will probably give you an accurate price. They do a good job.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •