I'm pretty sure the part number for the mounting bracket is 34-73802 and I know the part number for a pack of two short clutch levers is 30-73752. Should be about $25 for both halves.
I'm pretty sure the part number for the mounting bracket is 34-73802 and I know the part number for a pack of two short clutch levers is 30-73752. Should be about $25 for both halves.
I stand corrected the brand I use I have been using (for no particular reason apart from the fact they were on the shop shelf) is SUPERin.
Part number of the clutch leaver 004-912BBL and that is the GP long lever in black, I normally use the short leaver on the clutch but just brought what they had cause I needed a spear for the two hour. Sticker price on this is $29.90 from Colemans Suzuki (ok it is more than $25) and that is both the lever and the perch.
Streching my memory back I may have cleaned up the outside of the clutch cable cover with a file so it fitted a little easier.
I use a GSXR250 master cylinder Henk so so not sure it is relevent but the brake lever is also a SUPERin and has a sticker price of $40.
On an unrelated note regarding levers I personally have found that modern levers are more britlle than the older ones. I heve the original brake lever on the bike at the moment and that has bent and never broken, however when I first used the master cyclinder I replaced the lever with a straight one ad it broke the moment it hit the track. Put the old one back on (still had it as a spear) and never had a problem since.
I'm using one of these
http://www.cycletreads.co.nz/product...and_brake.aspx
On the clutch but only because I like shiny things. It survived two left side lowsides at the two hour by politely getting out of the way when the bike hit the deck but with the price of them probably not an option for the original intent of this thread.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks