Hey,
My CBR rear brake light isnt working (with the use of the front lever) what should I be looking at to try and fix it? only just noticed it last night - works fine with foot brake.
Epic Motherfucker
Hey,
My CBR rear brake light isnt working (with the use of the front lever) what should I be looking at to try and fix it? only just noticed it last night - works fine with foot brake.
Rider Coach
An easy one this... All early CBR's have the same issue if the switch isn't kept clean.
Look at where the wires go into a little Black box on your front brake leaver and give it a blast with some CRC Contact cleaner. This will blow the dirt out, and also clean up the contacts inside the switch.
Failing this you will need to find a second hand one from somewhere... no guarantee the replacement will work... But that is the problem.
Last edited by quickbuck; 11th December 2009 at 20:48. Reason: poor wording.
Fair weather rider
just replaced my front brake switch on cbr250rr, was $48 new from honda took a week to come in from japan, 2 little screws that hold in the black box. its the thing that clicks when you pull on the brake lever and has 2 wires connected to it. be carefull not to break of the spade terminals or the wires
Conquiztador:There is 250's and then there is 2fucken50's!!!
Epic Motherfucker
Cool cheers guys. Haven't had time to look at it properly yet but thought i would ask first anyway
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks