Results 1 to 14 of 14

Thread: Made a meal of that (crashed)

  1. #1
    Join Date
    1st May 2006 - 11:41
    Bike
    1987 GSXR750
    Location
    Christchurch
    Posts
    404

    Thumbs down Made a meal of that (crashed)

    Haha, 5 years on I manage my first non track bin at a whopping 15-20km/hr.

    WOF is up, time for a new one methinks - hmm front looks mighty worn, about time for a new one. $170 @ pitlane later i'm back on my way "no stoppies first corner" Don jokes to me as I leave.

    Yup won't do that, silly greasy mould release compound .. sure enough the first corner I get to I trundle around gently and WHAM I find myself sliding into the middle lane of Bealey Ave. Thankfully straight through traffic was on red light so I didn't get lunched. Managed to get my leg trapped under it, luckily two nice citizens ran over and together lifted it off me (swearing about how heavy it was as they did lol ) Unbelievable

    Quick look over it and myself, surprisingly managed to rip and fairly destroy one leg of my draggin's (under the bike) alpinestar zip together jacked fared perfectly well as did helmet & gloves. Not even a graze for me, just a bruised ego and a road rashed gixxer.

    Gah, what a champion

    Got some fine grit sandpaper onto the front when I got home, still won't trust it for another week or two yet I think! (what can you scrub/soak the tyre in, I've read about on KB before)

    On the upside, got my WOF. Had a spare indicator lens at home, only thing that broke aside from the rash - not even the bulb had blown!)

  2. #2
    Join Date
    20th November 2006 - 18:38
    Bike
    '87 GSX750SF Katana, 08 Cagiva Raptor
    Location
    Christchurch
    Posts
    1,062
    Sorry to hear that. Ive nearly done the same thing on the same corner.

    Ive heard people talk of brake fluid, but to be honest your probably better off just finding a nearby gravel road and just running up and down that for a few minutes.

  3. #3
    Join Date
    10th May 2009 - 15:22
    Bike
    2010 Honda CB1000R Predator
    Location
    Orewa, Auckland
    Posts
    4,490
    Blog Entries
    19
    Was the damage to the draggins in a place with no kevlar by chance?

  4. #4
    Join Date
    1st May 2006 - 11:41
    Bike
    1987 GSXR750
    Location
    Christchurch
    Posts
    404
    both, but yes the kevlar held up pretty good. Denim, not so much.

  5. #5
    Join Date
    3rd November 2007 - 07:46
    Bike
    KTM 1290 SDR
    Location
    Palmerston North
    Posts
    3,962
    Quote Originally Posted by FruitLooPs View Post
    Got some fine grit sandpaper onto the front when I got home, still won't trust it for another week or two yet I think! (what can you scrub/soak the tyre in, I've read about on KB before)
    Brakleen! Spray a rag and wipe the tyre. Don't spray directly on to the tyre and don't use brake fluid.
    Nunquam Non Paratus

  6. #6
    Join Date
    24th November 2005 - 22:38
    Bike
    2008 Honda Hornet 900
    Location
    Hawes Bay
    Posts
    9
    Agree with spud,nice slow ride down a deep gravel(dry) road,tried it several times-If ya don't fall off,the tyres will be ready to boogie.
    Earl

  7. #7
    Join Date
    15th March 2004 - 13:00
    Bike
    Austrian and Italian
    Location
    Glenfield, Auckland
    Posts
    4,687
    Quote Originally Posted by p.dath View Post
    Was the damage to the draggins in a place with no kevlar by chance?
    Doesn't matter. The denim layer over top of the kevlar will still get munted. As long as the Kevlar weave section stays in one piece you're good.

  8. #8
    Join Date
    15th June 2008 - 18:13
    Bike
    rego on hold nick smith special
    Location
    NZ
    Posts
    1,933
    Blog Entries
    1
    That sucks man. Glad it wasn't any faster and with traffic around!

    Isn't running in the new tyre about heating it up and having the initial oils seep from the tyre though?

  9. #9
    Join Date
    13th April 2004 - 13:57
    Bike
    Riffer
    Location
    Hamilton
    Posts
    477

    dont use brake fluid

    dont use brake fluid i dont think it would do much, now brakleen on the other hand might help. to be honest with you i dont use anything i just ride it, never really had a problem but i can tell you tyre warmers make it real easy. so id say thats the answer dont try anything until you warmed it up even if you have to ride in a straight line to get some heat in them. good luck
    I'm off to the pub, I may be sometime.

  10. #10
    Join Date
    26th September 2006 - 16:33
    Bike
    Suzuki Smash 2016. (Yes, really!)
    Location
    Philippines
    Posts
    1,325
    See if you can find some nice firm sand to ride on. The abrasive action might clean it up a bit.
    "Statistics are used as a drunk uses lampposts - for support, not illumination."

  11. #11
    Join Date
    13th April 2007 - 17:09
    Bike
    18 Triumph Tiger 1050 Sport
    Location
    UK
    Posts
    3,802
    A pretty dissapointing story.

    I've not known new tyres slip that badly.

    Zig Zag about a bit and they're good to go.

    Hope it all worked out Ok.
    “PHEW.....JUST MADE IT............................. UP"

  12. #12
    Join Date
    15th March 2007 - 20:38
    Bike
    BMW R1200s
    Location
    Te Atatu Peninsula
    Posts
    517
    I have had new tyres put on every bike I've owned and never had any real scares with them.
    They are slippery but after the first couple of corners they seem fine.

    Glad to hear you made it out with only minor damage.

  13. #13
    Join Date
    30th March 2004 - 11:00
    Bike
    2001 RC46
    Location
    Norfshaw
    Posts
    10,455
    Blog Entries
    17
    Was the road damp/wet or summat?
    I've never had a new tyre that slippery (mind you, the last few sets were Avons, and they don't use a silicon-based mould release). Usually, the new tyres are fine in the dry.
    ... and that's what I think.

    Or summat.


    Or maybe not...

    Dunno really....


  14. #14
    Join Date
    21st October 2005 - 20:58
    Bike
    2014 Honda NC750X
    Location
    West Auckland
    Posts
    3,478
    Quote Originally Posted by vifferman View Post
    Was the road damp/wet or summat?
    I've never had a new tyre that slippery (mind you, the last few sets were Avons, and they don't use a silicon-based mould release). Usually, the new tyres are fine in the dry.
    I would say that the surface had all manner of road crap on it.

    I've had the same thing happen to me in Palmerston North.... Was put down to a combo of new tyres, white paint a drop of oil, and the need to try and get out of the intersection quickly.... As every Fcuker wants to do 60, and close up all the gaps as they approach the main road!!

    Good to hear the OP's bin wasn't too serious.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •