L-Plate Rider
I've tried a search but not had much luck.
Can anyone recommend a small engineering shop in Auckland (preferably around Glenfield, where I work) that can help with getting out a stuck bolt?
It's fairly easily accessible and I think can be removed by welding on a hex nut and using that for removal - the internal allen key fitting is just rounding off (even with a good git and decent tools).
Cheers, Rob.
Send lawyers, guns and money,
The shit has hit the fan.
- Warren Zevon
Rider in training
Try one of these from the Wiki:
http://www.kiwibiker.co.nz/wiki/Cate...le_Engineering
For whom the bell tolls
What you need is an 'easy out' - it's a tool for removing munted bolts.
KiwiBitcher
where opinion holds more weight than fact.
It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.
The 2nd-most bad arse KBer.
actually im in need of a good engineering shop too. (in glenfield)
Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot
For whom the bell tolls
None of the companies listed in that wiki page are 'engineering' companies except perhaps for the exhaust company.Originally Posted by p.dath
Might help if you say what you need done?
KiwiBitcher
where opinion holds more weight than fact.
It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.
Hardcore Biker
Select Engineering. 50 Parkway Drive (off Constellation)
They've done some stuff for me.
Kindly sponsored by:
CCL Communications[CENTER]
Cycletreads
divide interior design
L-Plate Rider
I've got easy outs - not suitable in this case, the thing is in too tight, I suspect the easy out will just shatter leaving me with a bolt filled with hardened metal which is a REAL bitch to drill out and remove. Been there, not fun.
Send lawyers, guns and money,
The shit has hit the fan.
- Warren Zevon
L-Plate Rider
Awesome, just what I wanted, thanks mate.
Rob.
Send lawyers, guns and money,
The shit has hit the fan.
- Warren Zevon
Hardcore Biker
If you get stuck give me a call on 09 424 0477
Hibiscus Coast Service Centre, Im in Whangaparaoa and Im forever removing broken and rounded fittings from bikes, cars and trucks.
L-Plate Rider
Thanks very much for the offer - I actually managed to come good with judicious application of a propane torch and extreme force!If you get stuck give me a call on 09 424 0477
Hibiscus Coast Service Centre, Im in Whangaparaoa and Im forever removing broken and rounded fittings from bikes, cars and trucks.
I may still seek out the engineering shop to rebuild my original side stand - the alloy probably needs sleeving.
Cheers, Rob.
Send lawyers, guns and money,
The shit has hit the fan.
- Warren Zevon
Scooter boy
Pm me my man as I have a fully kitted part time W/S and MAY be able to assist for a reasonable price.
L-Plate Rider
Just a quick follow up on this - ended up getting my side stand rebushed by the guys at Select engineering. Not cheap but came in at less than what they quoted and they did a great job, highly recomended.
Rob.
Send lawyers, guns and money,
The shit has hit the fan.
- Warren Zevon
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks