Help - front sprocket needed

**Sketchy Snr** · 23rd December 2009, 17:58

I need a front sprocket for Glens bucket so i can ride it at taupo. Its a MB 100 or a H 100 15, 16 or 17 tooth.
Thanks Snr

**Trudes** · 23rd December 2009, 18:05

I thought I gave him one, has he worn it out already??
I'm fairly certain they're easy to come by, Richards MC and Boyles usually have them in stock, have you tried them?

**Sketchy Snr** · 23rd December 2009, 18:28

Originally Posted by Trudes

I thought I gave him one, has he worn it out already??
I'm fairly certain they're easy to come by, Richards MC and Boyles usually have them in stock, have you tried them?

Cool, i think Andrew is going to check town for me tomorrow. Thanks

**bucketracer** · 23rd December 2009, 18:30

428 or 420 chain, if your totally stuck, try Team ESE, the GP ones have the same spline I think, also I will check at work tomorrow, to see whats there.

**Skunk** · 23rd December 2009, 18:51

428 chain - standard MB100 stuff. Too busy with Whanganui and the Tri Series and forgot all about it till tonight!

**Kendog** · 23rd December 2009, 19:04

Originally Posted by Skunk

428 chain - standard MB100 stuff. Too busy with Whanganui and the Tri Series and forgot all about it till tonight!

I can buy one tomorrow for you if needed, just let me know.

**koba** · 24th December 2009, 06:27

Originally Posted by Sketchy Snr

I need a front sprocket for Glens bucket so i can ride it at taupo. Its a MB 100 or a H 100 15, 16 or 17 tooth.
Thanks Snr

I will pull my sprocket off and chuck it in the toolbox in case you don't get another in time.

**Str8 Jacket** · 24th December 2009, 06:31

Originally Posted by koba

I will pull my sprocket off and chuck it in the toolbox in case you don't get another in time.

Does this kind of sound dirty to anyone else? Hmm?...

**Deano** · 24th December 2009, 06:44

Originally Posted by Str8 Jacket

Does this kind of sound dirty to anyone else? Hmm?...

No you're just rude Hel's. Maybe after a bottle of red.....

**Sketchy Snr** · 24th December 2009, 07:38

Originally Posted by koba

I will pull my sprocket off and chuck it in the toolbox in case you don't get another in time.

That would be Awesome. Thanks

**TZ350** · 24th December 2009, 08:23

Bike 14 from Team ESE will have some spare 428 sprockets in all the larger sizes and a locking plate and bolts if you need them. Team ESE will be in one of the garages.

.

**F5 Dave** · 24th December 2009, 08:25

Suzi stuff is a different spline.

unless there is a super big rear spocket 17, 16 & probably 15 will be too big. Taupo isn't that long.

**TZ350** · 24th December 2009, 08:37

Originally Posted by F5 Dave

Suzi stuff is a different spline.

unless there is a super big rear spocket 17, 16 & probably 15 will be too big. Taupo isn't that long.

Nop.....just tried one of our sprockets on a MB100 and it fits but unlike the Suzi's which use a nut and lockwasher the Honda use a locking plate and two 10mm bolts to secure the sprocket, the Honda sprockets must have two 10mm bolt holes, and generic sprockets usually come with these bolt holes. In the spares box there will be spare set of sprockets from 13-17 if Sketchy Snr needs to borrow one.

.

**F5 Dave** · 24th December 2009, 09:51

Well that is weird as all buggery! Other suzi stuff like my RG & TS doesn't fit, the Honda stuff is smaller. . . . hmm, I'll stop right there & consult the JT book I have near my desk.

[reads]
yeah you're right. Sort of. Yes it will fit. The MB & the GP (or RG) have a 4mm spline.

But the difference is the MB is 17mm across the flats where the Suzi stuff is 20.

You won't be getting full engagement of the splines.

**TZ350** · 24th December 2009, 10:52

Originally Posted by F5 Dave

You won't be getting full engagement of the splines.

Ok...I put my glases on and tried a JTF425-14 sprocket on a GP125, perfect fit, Honda SL/XL100 perfect fit, RG50 good useable fit but splines could be a little deeper, Honda MB100 sloopy fit. Use only if desperate.

Your right F5, Suzuki GP sprockets aren't any good for MB100's but they will fit SL/XL100's, odd that......

.