Wave front discs to suit nearly ANY bike

**neil_cb125t** · 14th January 2010, 11:26

Originally Posted by SuperSonic

How much and do you have any for a Suzuki Sv1000 k3?

yep easy $450 plus NZ postage for front 2

**neil_cb125t** · 14th January 2010, 11:32

Originally Posted by mokomoa

any for a 2002 aprilia rsvr???

hi the listing ive found has OD of 320mm - ID hole of 64mm Bolt hole dia 8.4mm with 10mm run out - this sound right?? its listed as a 2004 RSVR

**neil_cb125t** · 14th January 2010, 11:33

Originally Posted by sharky

Hope you're not planning on using them in Posties

ha ha na but ill have my norm discs for posties... hehe

**Jim Shady** · 15th January 2010, 07:14

Gidday, looking for a rear disk for a 97 tl1000s, would you have something suitable?

**alcatraz** · 15th January 2010, 20:47

They are made by Galfer heres the website http://www.galferusa.com/ galfer brake rotors.

**Cr1MiNaL** · 15th January 2010, 21:02

[QUOTE=quickbuck;1129609323]All i will say to this is...... Once Neil fits them to his bike, try and out brake him into Toyota at Manfeild... and see how good they are.
QUOTE]

Neil huh... thought his name was Chappy lol

**SuperSonic** · 16th January 2010, 07:10

Originally Posted by alcatraz

They are made by Galfer heres the website http://www.galferusa.com/ galfer brake rotors.

Cheers they do look the same.

**Hotte** · 19th January 2010, 14:22

Hi Neil,
Please quote a pair of front disc for Yamaha TDM 850 1992. regards Hotte[EMAIL="h_w_eisenhauer@yahoo.com"]

**neil_cb125t** · 26th January 2010, 12:16

Originally Posted by Hotte

Hi Neil,
Please quote a pair of front disc for Yamaha TDM 850 1992. regards Hotte[EMAIL="h_w_eisenhauer@yahoo.com"]

Cheers i will do in the next few days still on holiday!!

**mokomoa** · 27th January 2010, 07:37

Originally Posted by neil_cb125t

hi the listing ive found has OD of 320mm - ID hole of 64mm Bolt hole dia 8.4mm with 10mm run out - this sound right?? its listed as a 2004 RSVR

2002 not '04. I think they are different..

**neil_cb125t** · 27th January 2010, 10:53

Hi peoples

Most request have been answered - The Aprillia millie i found that the discs should be the same ie from 2001 to 2004. a good site to check is http://www.metalgear.com.au/mgmodel.asp

the only bike i could not find is the CBR250 with a OD dia of 276mm - im hoping to place another order ASAP.

I also am racing at the PMCC meeting on Sunday at manny and will have the rotors on display there - please stop by and check them out!!

prices are still $450 for fronts rears are around $100-120 but ca do a full set front and rear for around $500 ( due to postage savings )

catch you all soon

chappy