Results 1 to 4 of 4

Thread: SJ50 draining battery overnight

  1. #1
    Join Date
    29th December 2008 - 14:42
    Bike
    2008 Suzuki SV1000SK7
    Location
    Palmerston North
    Posts
    58

    SJ50 draining battery overnight

    hi,
    i'm fixing up an SJ50QT for a mate.. it has been in a crash and had the front end run over.
    put new forks and a front wheel on it and it's all sweet, chucked a new battery in it also.
    this morning i discovered the battery had gone flat in 36 hrs with the key off.
    It was fully charged when i put it in and reading over 13 volts.
    i hooked up a multimeter to see if anything was happening with the key off and sure enough something is pulling around 120 milli amps. 450 ma with key on.
    any suggestions as to what might be happening and where I should start looking for the culprit?

  2. #2
    Join Date
    5th February 2008 - 13:07
    Bike
    2006 Hyosung GT650R
    Location
    BOP
    Posts
    7,141
    Is there a light under the seat or something similar?

    Steve
    "I am a licenced motorcycle instructor, I agree with dangerousbastard, no point in repeating what he said."
    "read what Steve says. He's right."
    "What Steve said pretty much summed it up."
    "I did axactly as you said and it worked...!!"
    "Wow, Great advise there DB."
    WTB: Hyosung bikes or going or not.

  3. #3
    Join Date
    29th December 2008 - 14:42
    Bike
    2008 Suzuki SV1000SK7
    Location
    Palmerston North
    Posts
    58
    You might have hit the nail on the head there! There is a light... and I do recall the seat not shutting properly. I'll check out the latch and switch when I get home and hopefully that's all it is! Thanks

  4. #4
    Join Date
    25th September 2009 - 18:05
    Bike
    A bleck one.
    Location
    Auckland
    Posts
    468
    The battery could still be fooked despite a 13V reading. It's what's known as a surface charge. How does it load test? Turn the headlight on and measure the battery voltage drop for an indication. (EDIT: missed the fact it was new!)

    120mA isn't much but it's more than it should be. It could also be a faulty rectifier diode. Try disconnecting the charging circuit and remeasure the draw.
    This is my signature. There are many like it, but this one is mine. My signature is my best friend. It is my life. I must master it as I must master my life. Without me, my signature is useless. Without my signature, I am useless.

    The early bird might get the worm, but the second mouse gets the cheese.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •