Suzuki fxr programmable cdi - amateur

[CookMySock]

is the entire map editable? or just program the unit to use a different pre-loaded map?

Have a look at the screenshots in the first post. You can map the whole rpm/ignition curve out using the included software.

Great for full-power running, but really needs a manifold pressure sensor for economy or boost, like this;




Steve

[k-tech]

Hi K-Tech.

Have you done any development on two-stroke singles

I know that a lot of the F4&F5 racers (referred to as Bucket racers) are always on the look out for bits like this.

When you say the units are programmable, is the entire map editable? or just program the unit to use a different pre-loaded map?

Yes bro,
its a programmable cdi, yez 2 stroke in here we have R&D was Kawasaki 150RR - DC CDI
http://www.motorcyclespecs.co.za/mod...zx150%2002.htm
and YEZ WHOLE ENTIRE MAP editable, you could ruined them too, haha,joking bro.
if you're talking different preloaded map, that's ADJUSTABLE, what we have here is PROGRAMMABLE, UNIVERSAL PROGRAMMABLE CDI we may called.
after you're bored playing with your 2stroke single, you got 4stroke single,
just use the same cdi from us, as long as you know the ignition degree system, knowing the wiring diagram, build a new cdi socket connector,
connect to computer, edit your own new map for 4stroke single, download to the cdi, then, you have a GO..........!!!!!!

as our moto
HAPPY PLAYING WITH THE IGNITION

thanks for your attention bro

[k-tech]

Have a look at the screenshots in the first post. You can map the whole rpm/ignition curve out using the included software.

Great for full-power running, but really needs a manifold pressure sensor for economy or boost, like this;




Steve

yez steve, thanks for sharing. we still looking for this info of your MAP Sensor.
but if just the cdi for your hyo's, we can provided, this weekend for sure. ;-)
not forget to thank for all your info n time. we do appreciated.
much appreciated

[k-tech]

addition:

device connected

[k-tech]

upload map from cdi to pc

[k-tech]

show legend menu

[k-tech]

show legend + voltage data

[k-tech]

Additional keypad programmer
allow you to keep changing, adjusting or re program the map while you're away from your pc/notebook (while touring or etc) of the ignition angle.

[k-tech]

additional map selector
you may change your own modified curve from 2 maps upto 10 maps
Newbie = 2maps + 2 voltage outputs (X2 energy output optional)
Amateur = 3 maps upgradable to 8 maps (optional) + 2 voltage outputs with X2 energy output included
Pro = 8 maps upgradable to 10 maps + 3 voltage outputs with X2 energy output included
Drag = 10 maps + 4 voltage outputs with X2 energy output included

Note.
basicly, we have loaded the maps into 3 categories.
1. Sport (short distance)
2. Touring (long distance)
3. All Sport
(based on our R&D on common local bikes produced here)




On Suzuki FXR, it has a gear sensor, so you may directly connected to CDI out put map connector.
So, you will have 6 different maps + 1 neutral, which directly connected to the gear sensor (requiring a support cdi-amateur with 8 maps)
Then each gear will have its own map, its own character, its own power