Results 1 to 7 of 7

Thread: Need CDI that will work in a 2002 SX250

  1. #1
    Join Date
    24th March 2010 - 19:01
    Bike
    2011 yz 250
    Location
    Orini
    Posts
    11

    Need CDI that will work in a 2002 SX250

    my bike dies after riding and is due to no spark. possibly need new CDI but are expensive to buy new. If there are any that are working and for sale let me know. cheers

  2. #2
    Join Date
    25th April 2009 - 17:38
    Bike
    RC36, RC31, KR-E, CR125
    Location
    Manawatu
    Posts
    7,364
    alternatively you could get an electronics hardout to look at it, could be an easy fix
    "A shark on whiskey is mighty risky, but a shark on beer is a beer engineer" - Tad Ghostal

  3. #3
    Join Date
    24th March 2010 - 19:01
    Bike
    2011 yz 250
    Location
    Orini
    Posts
    11
    good idea, an auto electrician i suppose?

  4. #4
    Join Date
    25th April 2009 - 17:38
    Bike
    RC36, RC31, KR-E, CR125
    Location
    Manawatu
    Posts
    7,364
    nah, doubt they would know what to do, engineering/electronics students prolly the way to go
    "A shark on whiskey is mighty risky, but a shark on beer is a beer engineer" - Tad Ghostal

  5. #5
    Join Date
    16th February 2007 - 08:25
    Bike
    vf1000,mz500,xz400,kh125,bridgestone60
    Location
    new plymouth
    Posts
    533
    heres a cdi which should work in your bike or this one or this one

  6. #6
    Join Date
    24th March 2010 - 19:01
    Bike
    2011 yz 250
    Location
    Orini
    Posts
    11
    i can seem to get it going if i take out the plug and clean it and get a few hours riding. Starting to think fueling issue now, or possibly try a hotter plug?

  7. #7
    Join Date
    10th September 2008 - 21:23
    Bike
    Tyre Shredder
    Location
    Valley of the Sun
    Posts
    1,068
    Find out what the standard sparkvplug is, fit it, make sure air filter is cleaned and oiled, then get your jetting adjusted. Take it into a shop. they'd tell you pretty quickly.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •