TZR or FXR?

[bungbung]

Loncin went in really easy, it's held in using the rear mounts only. I am using one the original 1kt engine mounts the upper left, I moved the upper right mount inboard. The lower mount(s) are on an adaptor plate that bolts to the original lower rear mounts. The Loncin is offset to the left to align the driveline.

[Buckets4Me]

Did the loncin go in without too much hassel?

have a look at the last few pages of the E.S.E thread they are fitting a gt125 suzuki twin and a gp125 suzuki single 2 smoker ebngines to very similar frames (the fzr 4 stroke bike)
the TZR frame would be better specialy on the bigger tracks (but you have to be able to get and fit a different engine)

should not be to hard and you will have a better bike just ask Bren_chch as I suspect he would agree with the yammy over the cheap and chearfull FXR frame
also speedpro fitted an mb100 to his FZR (there must be a reason so many people opt for those frames. Cheap, good and plentiful)

[koba]

Sounds like sound advice.
Just need someone who is handy enough to mount an engine for me now.

If you can/want to work on it yourself you are on the right track but if you just want to ride the thing I would buy an insurance write off FXR, strip it down and put slicks on it.

http://www.newmanz.co.nz/shop/ is one place to get a Loncin.

[fi5hy]

Loncin went in really easy, it's held in using the rear mounts only. I am using one the original 1kt engine mounts the upper left, I moved the upper right mount inboard. The lower mount(s) are on an adaptor plate that bolts to the original lower rear mounts. The Loncin is offset to the left to align the driveline.

When do we see you on the track again mate?????????????????????????