Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18

Thread: How do I copy contents of one HD to another?

  1. #16
    Join Date
    10th May 2009 - 15:22
    Bike
    2010 Honda CB1000R Predator
    Location
    Orewa, Auckland
    Posts
    4,490
    Blog Entries
    19
    Quote Originally Posted by SMOKEU View Post
    On another note, I tried to reinstall Ubuntu on my mums computer, and whenever I put a CD with the OS into the CD drive and set the BIOS to load from the CD, it just says that no OS is detected. I tried again with 2 other OSs and the same message appears. It's not the OS discs that are the issue, as I put the HD from that computer in my computer and installed Windows 7 onto it just fine, but the same copy of 7 won't even be detected on the other computer.

    I'm thinking it's an issue with the BIOS, or that the motherboard is phucked.
    Although you set it to boot from CD, I get the impression that it is not booting from CD. Is the BIOS showing that there is CD/DVD drive attached?

    And it is possible you simply have a damaged DVD drive. You could perhaps try a different DVD drive in that machine, rather than swapping hard drives.

    And I guess I had better not assume the obvious. Are you trying to boot from a DVD, and do you definitely have a DVD drive in the machine, and not just a CD drive?

    And unless the machines are of a similar type, you may not be able to move a Windows 7 hard drive from one machine to another and have it boot successfully. You may be able ot boot off the Windows 7 DVD though, and select to repair the boot process.

  2. #17
    Join Date
    31st March 2005 - 02:18
    Bike
    CB919, 1090R, R1200GSA
    Location
    East Aucks
    Posts
    10,499
    Blog Entries
    140
    As a side to that... it could also be a bad burn of the disc.
    Quote Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
    It's barking mad and if it doesn't turn you into a complete loon within half an hour of cocking a leg over the lofty 875mm seat height, I'll eat my Arai.

  3. #18
    Join Date
    13th December 2008 - 18:22
    Bike
    Your mom
    Location
    Christchurch
    Posts
    3,901
    Quote Originally Posted by p.dath View Post
    Although you set it to boot from CD, I get the impression that it is not booting from CD. Is the BIOS showing that there is CD/DVD drive attached?

    And it is possible you simply have a damaged DVD drive. You could perhaps try a different DVD drive in that machine, rather than swapping hard drives.

    And I guess I had better not assume the obvious. Are you trying to boot from a DVD, and do you definitely have a DVD drive in the machine, and not just a CD drive?
    I tried swapping CD/DVD drive with a different one and the same problem happens. The BIOS does show the drive is attached, and I have tried swapping the DVD drive onto a different IDE port on the motherboard. I'll try giving the BIOS a reflash and see if that helps. I gave it another shot and it's installing fine now. Problem solved.

    Quote Originally Posted by Gremlin View Post
    As a side to that... it could also be a bad burn of the disc.
    The same Windows 7 disc installed fine on my computer.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •