Anyone running a 06-07 CBR1000 race bike?

[Maido]

I have a 1000rr engine that we are putting in a sprint car for a guy.
Here is a good story, he thought it was a 06-07 engine. Now it came with wire harness etc except it didn't have the keys. (now anyone who knows anything about the HISS will know that if you don't have the keys withthe ECU you are screwed) So I aquired a 06 HRC ECU off ebay, it arrives and I find that it doesn't fit the harness, mainly cos the engine is actually an 04-05 and they are different.
So I get in a 06-07 american spec cbr wire harness off ebay cos they don't run the HISS system there and plug it all in good as. I have done all the obvious cutout things like sidestand etc so in theory it should just start up.
It doesn't however, and I am assuming that the HRC ECU is faulty (I have good peak voltage from all sensors into the ECU, but nothing out of it)

Now what I was after was if there was a kind person here I can send my HRC ecu to and check that it actually works.
The problem being is that (cos we are in NZ) the bike would have to have a HRC ECU already intalled. So it would either be running an HRC wire harness or they have modified the wire harness to allow the HRC ECU to work. The race ECU doesn't work on an unmodified stock wireharness.

Does anyone here have, or know of someone who has a 06-07 CBR1000RR that would be willing to try this ECU for me, or would be willing to send me their one for testing? I don't mind paying for your time either cash or beer etc!

[Tony.OK]

Sold my HRC a couple of months ago. Will PM ya the new owners Ph #, might be able to help ya out. He's in Christchurch.

You've prob already checked but its still got the tip sensor? Or did ya bridge it out? Wont start with it unplugged.

[Maido]

Sold my HRC a couple of months ago. Will PM ya the new owners Ph #, might be able to help ya out. He's in Christchurch.

You've prob already checked but its still got the tip sensor? Or did ya bridge it out? Wont start with it unplugged.

Yeah bank sensor still there and upright, I have bridged the sidestand switch also.

[kawawaka]

Hi Jeremy I race a 07 blade happy to help I was ment to race at bert but a broken bone racing stoped that good luck for the event Brendan at ashvagis honda has a HRC ecu and loom for sale might not help your your problem I should be at R3 ruapuna Alex 23

[kawawaka]

Hi Jeremy I race a 07 blade happy to help I was ment to race at bert but a broken bone racing stoped that good luck for the event Brendan at ashvagis honda has a 06HRC ecu and loom for sale might not help your your problem I should be at R3 ruapuna Alex 23

[Maido]

Hi Jeremy I race a 07 blade happy to help I was ment to race at bert but a broken bone racing stoped that good luck for the event Brendan at ashvagis honda has a 06HRC ecu and loom for sale might not help your your problem I should be at R3 ruapuna Alex 23

That is a huge huge help! I assume your running the ECU? I so can you PM me your address and I will get teh ECU up to you ASAP along with some courier tags for the return.