Help! Loncin wiring problems

[Gazzza]

Hi there, can any one please help with wiring for a Loncin 150... I have tried just about every combination but have got no spark at all. Ummm actually I have got a single spark when I swaped what I think are the Magneto charge and the trigger, but one spark then nothing, then I swap the wires give it a kick nothing then swap and one spark... any advice would be welcome.

[fi5hy]

Do you have one of the trigger wires earthed? The red and black wire should be your main feed at about 400/500 Volts. Also if you were supplied a coil from Newmanz make sure you have the earth wire hooked up right.(from memory they have a black and a green the green is earth) A Friend in the bay the other week had to connect the lighting coil outlet with the main red/black feed wire is get any go. Also leave the kill switch earth off till you get it firring.

[Gazzza]

whewww tried a few things and got a better earth and shes sparking. Now just got to sort out gear linkages, sprockets, mounts and I'm away...