GSX-R750 and DL-1000 front sprockets

[NinjaNanna]

Does anybody have an old front sprocket off of a GSX-R750 00-10 or DL-1000 02-10.

I need an old one to experiment with the gearing on my ZR750. There are no new ones available in NZ and shipping from the States is too expensive for an experiment.

Also if anybody has an old 525 chain longer than 106 links, I think I need that for my test too.

Any help would be greatly appreciated.

Cheers
NN

[DEATH_INC.]

Does anybody have an old front sprocket off of a GSX-R750 00-10 or DL-1000 02-10.

I need an old one to experiment with the gearing on my ZR750. There are no new ones available in NZ and shipping from the States is too expensive for an experiment.

Also if anybody has an old 525 chain longer than 106 links, I think I need that for my test too.

Any help would be greatly appreciated.

Cheers
NN

Are they the same as the srad? I may have a stock srad one kicking around....16t 525 from memory, the spline is the same as the later thou.

[DEATH_INC.]

Just read yer other thread....I'll see if I have a 17.......

[NinjaNanna]

Thanks Death_Inc JT website shows 98/99 SRAD as 16T and the K1-K3 SRADs as being 17t - but both are compatible with my bike.

If you happen to have a 16T I'd be grateful to try that as well. Not really sure how the old girl will pull with a 17T, and flip side is I'd probably get away with the current chain just going to the 16T.

Cheers
Shane