Cbr600rr $5990

**racefactory** · 28th December 2010, 08:40

Bike is gone.

**R6_kid:Me** · 28th December 2010, 09:42

missing keys.... lol are you serious?

**Damantis** · 28th December 2010, 09:56

Aren't they the transponder type that are horrendously expensive to replace?

**racefactory** · 28th December 2010, 10:22

Well if you get from a dealer it would be a good few hundred for sure, otherwise it's an ebay or wreckers job. The alternative would be to bypass the HISS. Neither of which i have the time or money for, hence the price.

**BADGRL** · 28th December 2010, 11:30

How long have you owned it?

**breakaway** · 28th December 2010, 14:55

FYI to potential buyers - new HISS transponder / keys are NOT cheap from the honda dealership, and it's almost impossible to find them second hand.

**fastoyz** · 28th December 2010, 15:56

its not hard to get around, get a usa loom + cdi off ebay will cost about $200-250nzd landed, take the barrel to a locksmith they can cut a key for about $25, then if you want it looking legit buy a honda blank key to get cut cost about $85

**racefactory** · 28th December 2010, 16:38

Originally Posted by breakaway

FYI to potential buyers - new HISS transponder / keys are NOT cheap from the honda dealership, and it's almost impossible to find them second hand.

I can't get through to any Honda dealers right now as it's holiday. Do you happen to know how much they are roughly?

its not hard to get around, get a usa loom + cdi off ebay will cost about $200-250nzd landed, take the barrel to a locksmith they can cut a key for about $25, then if you want it looking legit buy a honda blank key to get cut cost about $85

Thanks mate didn't know USA models come without HISS. It's a bit of a nuisance system really since nothing but grounding your bike to something solid will deter thieves!

**Mully** · 28th December 2010, 16:42

Did you lose the keys or did you find the bike?

**racefactory** · 28th December 2010, 18:44

I'm riding out to the spot where I think the keys are now- only it's 300km away. If i find em the price will go up to $6700.

Need a vehicle for work and have already bought something else so this will be up for sale regardless of if I find them or not.

**racefactory** · 28th December 2010, 18:46

Originally Posted by fastoyz

its not hard to get around, get a usa loom + cdi off ebay will cost about $200-250nzd landed, take the barrel to a locksmith they can cut a key for about $25, then if you want it looking legit buy a honda blank key to get cut cost about $85

that's a good option but fitting the loom will take me a few full days of work I'm sure. Wouldn't the whole bike have to come apart to do that?

**nallac** · 28th December 2010, 20:40

I can't remember if you need to change the whole loom or just the ECU?.
The key i had cut and recoded for my old Cb900 was $30,pretty cheap.

The Last price i saw for a complete new ECU and keys from Honda was $1300 odd...

It pays to keep ya spare key safe and secure..

**Clean_up** · 28th December 2010, 22:39

do you have even one key for this is do you have absolutely no keys at all?
kinda dodgey if ya got NO keys at all.
Whats the rego of the bike so I can run a carjam check?

**racefactory** · 29th December 2010, 08:31

Originally Posted by Clean_up

do you have even one key for this is do you have absolutely no keys at all?
kinda dodgey if ya got NO keys at all.
Whats the rego of the bike so I can run a carjam check?

Didn't I say missing keys? Stop dreaming mate, I've lost the keys to it.

Working on a new set. Few options but all rather expensive.

If anyone's interested they'll give me a text on the number provided. No keyboard warriors thanks.

**racefactory** · 29th December 2010, 08:33

Originally Posted by nallac

I can't remember if you need to change the whole loom or just the ECU?.
The key i had cut and recoded for my old Cb900 was $30,pretty cheap.

The Last price i saw for a complete new ECU and keys from Honda was $1300 odd...

It pays to keep ya spare key safe and secure..

You already had a key to work with I'm taking it? If not i'd like to know how you did that please!