Results 1 to 4 of 4

Thread: Front end rebuild by Triple-R.

  1. #1
    Join Date
    25th October 2002 - 17:30
    Bike
    GSXR1000
    Location
    Christchurch
    Posts
    9,291

    Front end rebuild by Triple-R.

    I've had my K2 thou for a few years now, and over that time it's slowly had some 'modifications' made to it. Nothing too major, replaced the 6 pot calipers for some 4 pot Brembo's, Ohlins rear shock and steering damper, Yoshi EMS, adjustable rearsets, fancy levers etc etc. It's always kept me happy, more than enough bike for the road and a heck of a lot of fun on the track. After recent dyno work tuning the EMS with Red from Triple-R Superbike on St Asaph St, I was chuffed to have seen a 15hp gain, taking it to 159rwhp, and a huge dip in the torque curve at about 8000rpm obliterated. While there I talked to Red about getting the forks done, as it was an area I had so far missed. I was keen, but as far as I was concerned, there was nothing really wrong with them. Oh how wrong was I.

    Red replaced the standard fork springs with Race Tech .95 springs, installed Race Tech compression valves, and fitted higher flow rebound valves. He also increased the air gap, and dumped the watery excuse for fork oil with nice new oil. We then set up the sag on both the front and rear, and from his experience adjusted the external clickers on both ends to give me a good base to work from.

    And so today I took it out for it's first ride. The forks have been dropped 5mm further through the triple clamps to speed up the steering slightly, and with this and the other changes I noticed the bike definitely sat lower. With new rubber fitted about 60km ago (Pilot Pures) and pressures set, I along with my girl on her 600 and imdying on his thou headed out to a spot 30mins out of town. What a transformation! It now feels eager to enter corners, not that it didn't so much before but it took convincing, however now there is a definite eagerness. And when leant over, it asks for more, and feels rock solid. It's hard to explain, but suffice to say in comparison it feels like the front end was 'fighting itself' previously, whereas now it appears to be just left up to it's job, keeping the front wheel in check.

    I talked to Red as I left his shop the other day about keeping this bike, but that I'd look to buy a new model some time soon. Forget that, I now look at this bike in a completely different light. So, if you're in Christchurch and riding an older bike, or even a newer one on stock suspension, you'll do yourself no harm by calling in and talking with Red. I only wish I'd done it earlier.
    Last edited by onearmedbandit; 9th January 2011 at 21:14.

  2. #2
    Join Date
    9th January 2005 - 22:12
    Bike
    Street Triple R
    Location
    christchurch
    Posts
    8,376
    Its great that we now have a local guy to do this sort of stuff. I won't have to post all my bits oop north any more!

    good writeup by the way.
    I thought elections were decided by angry posts on social media. - F5 Dave

  3. #3
    Join Date
    19th January 2006 - 19:13
    Bike
    mutton dressed up as lamb and a 73 XL250
    Location
    On any given sunday?
    Posts
    9,032
    Good read mate,nice to hear your keeping it,amazing what some work from someone that knows what there doing does to a bike eh,seems to me theres far more satisfaction in getting an older one sorted than writing a cheque for a new one though each to there own i guess.
    Be the person your dog thinks you are...

  4. #4
    Join Date
    11th June 2007 - 08:55
    Bike
    None
    Location
    New Plymouth
    Posts
    5,053
    Peter ( Red ) is our appointed South Island technician for Ohlins and Race Tech and we are delighted how he is getting up to speed. This just doesnt happen overnight.
    Peter has access to Ohlins factory information that is not available to other suspension technicians in the South Island so it makes sense to use his services.
    We wish him well in going from strength to strength.

    Ph: 06 751 2100 * Email: robert@kss.net.nz
    Mob: 021 825 514 * Fax: 06 751 4551

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •