Results 1 to 13 of 13

Thread: Repairing textile gear?

  1. #1
    Join Date
    18th May 2010 - 14:51
    Bike
    03' VTR250
    Location
    Swanson, Auckland
    Posts
    174

    Repairing textile gear?

    Following my accident last week, there is a hole about the size of a $5 note folded in half (maybe a bit smaller) in the knee of my motorcycle pants I just brought the weekend before. Naturally I'm not really willing to just buy a new pair since I just got them and am a poor student, so I was wondering if anyone has information about fixing them. If anyone knows who would fix them I would get in touch with them but I would be happy to patch it up myself if I knew where I could get a piece of a similar fabric as the armour and such is still fine
    Be not afraid of greatness; some are born great, some achieve greatness and some have greatness thrust upon 'em

  2. #2
    Join Date
    18th February 2007 - 22:47
    Bike
    RATS & RICE
    Location
    .
    Posts
    2,142
    Blog Entries
    4
    Does the hole go right through the pant's or is it just the outter layer??

    Getting someone too repair the hole means they usually have too unpick the stitching from the inside, That can comprimise any water proofing your pants may have...But go see an Upholster/sail maker or tailor

    If it's just the outter layer I wouldn't worry too much about it as you haven't damaged the waterproof membrame,so your better too just glue a patch over it like a tent repair...or just Duc tap

  3. #3
    Join Date
    18th May 2010 - 14:51
    Bike
    03' VTR250
    Location
    Swanson, Auckland
    Posts
    174
    There is a very tiny hole in the waterproofing that I would be happy with just duct taping. Just want to patch up the outer so it doesn't fray more away, and is a mostly permanent and flexible repair so I can use them for my commute
    Be not afraid of greatness; some are born great, some achieve greatness and some have greatness thrust upon 'em

  4. #4
    Join Date
    4th November 2007 - 13:39
    Bike
    a fucking hornet
    Location
    dunedin
    Posts
    3,022
    Quote Originally Posted by oracle View Post
    There is a very tiny hole in the waterproofing that I would be happy with just duct taping. Just want to patch up the outer so it doesn't fray more away, and is a mostly permanent and flexible repair so I can use them for my commute
    you could try a soft vynal or leather patch

    plastic fabricator/welder here if you need a hand ! will work for beer/bourbon/booze

    come ride the southern roads www.southernrider.co.nz

  5. #5
    Join Date
    2nd February 2008 - 15:59
    Bike
    Roadstar 1600 & Royal Star Venture
    Location
    Wellington
    Posts
    2,076
    Quote Originally Posted by oracle View Post
    Following my accident last week, there is a hole about the size of a $5 note folded in half (maybe a bit smaller) in the knee of my motorcycle pants I just brought the weekend before. Naturally I'm not really willing to just buy a new pair since I just got them and am a poor student, so I was wondering if anyone has information about fixing them. If anyone knows who would fix them I would get in touch with them but I would be happy to patch it up myself if I knew where I could get a piece of a similar fabric as the armour and such is still fine
    the gear is designed to do its job. It's done it!
    Unless you can find someone who can sew a cordura/kevlar patch on the knee of the correct type? next time you'll have bugger all protection from friction on that knee.
    If the road to hell is paved with good intentions; and a man is judged by his deeds and his actions, why say it's the thought that counts? -GrayWolf

  6. #6
    Join Date
    14th June 2007 - 22:39
    Bike
    Obsolete ones.
    Location
    Pigs back.
    Posts
    5,390
    Just whack some duct tape on until Christmas, put some new ones on your Santa list.
    Over the years I've used rolls of the stuff to hold gear together & it works perfickly.

  7. #7
    Join Date
    18th May 2010 - 14:51
    Bike
    03' VTR250
    Location
    Swanson, Auckland
    Posts
    174
    Quote Originally Posted by GrayWolf View Post
    the gear is designed to do its job. It's done it!
    Unless you can find someone who can sew a cordura/kevlar patch on the knee of the correct type? next time you'll have bugger all protection from friction on that knee.
    Well that's what I'm looking for a piece of cordura/leather that I could sew on as the armour is still completely in place (directly underneath where the abrasion occurred)
    Be not afraid of greatness; some are born great, some achieve greatness and some have greatness thrust upon 'em

  8. #8
    Join Date
    4th July 2010 - 19:25
    Bike
    Suzuki
    Location
    Auckland
    Posts
    64
    Leather pieces - something like this:
    http://www.trademe.co.nz/Crafts/Fabr...-397823118.htm
    http://www.trademe.co.nz/Crafts/Fabr...-398043513.htm

    Probably not racing grade but better than nothing. Have a look on TM - many similar if not better auctions.

  9. #9
    Join Date
    30th March 2004 - 11:00
    Bike
    2001 RC46
    Location
    Norfshaw
    Posts
    10,455
    Blog Entries
    17
    MSW in St Kevins Arcade on K Road repair textile gear. What they'll do is glue a waterproof patch of similar material onto the inside. My first and second repairs were for a Teknic Hurricane Cordura jacket with small abrasion holes. (Subsequent repairs were effected by leather overlays).
    ... and that's what I think.

    Or summat.


    Or maybe not...

    Dunno really....


  10. #10
    Join Date
    10th December 2009 - 17:06
    Bike
    Geriatric Kwakas + dragqueen hyperscoot
    Location
    Planet Duct Tape
    Posts
    1,084
    hole that size needs a leather overlay. Wont be cheap, but cheaper than new gear. i did both knees for a chap a while back who had knelt on his wifes bikes exhaust and melted the textile. Easy and effective repair to see you through
    feralconnection Ltd
    Leather lettering and seat rebuilds
    Gear alterations and repairs
    PM me and lets talk
    !

  11. #11
    Join Date
    19th April 2009 - 18:52
    Bike
    SF
    Location
    Hamiltron
    Posts
    1,847
    Quote Originally Posted by Ratti View Post
    hole that size needs a leather overlay. Wont be cheap, but cheaper than new gear. i did both knees for a chap a while back who had knelt on his wifes bikes exhaust and melted the textile. Easy and effective repair to see you through
    Interesting. Any reason why you wouldn't patch it with textile? Or just preference?

  12. #12
    Join Date
    10th December 2009 - 17:06
    Bike
    Geriatric Kwakas + dragqueen hyperscoot
    Location
    Planet Duct Tape
    Posts
    1,084
    Why patch with something that won't wear as well when one has the opportunity to upgrade a high impact area with leather?
    feralconnection Ltd
    Leather lettering and seat rebuilds
    Gear alterations and repairs
    PM me and lets talk
    !

  13. #13
    Join Date
    30th March 2004 - 11:00
    Bike
    2001 RC46
    Location
    Norfshaw
    Posts
    10,455
    Blog Entries
    17
    Indeed. After I had my jacket repaired with leather, I had a few more 'offs', and both my jacket sleeves and leather trou never needed more'n a spot of shoe polish or leather treatment to be all goodly again. Textile's convenient, but pretty ineffectual when it comes to abrasion reistance.
    My current trou are textile Spidi Gran Turismo, with leather on the seat and inside legs (the latter presumably for hot zorsts?), and hips (added by MSW). Some leather on the knees and they'd be perfect.
    ... and that's what I think.

    Or summat.


    Or maybe not...

    Dunno really....


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •