Page 24 of 28 FirstFirst ... 142223242526 ... LastLast
Results 346 to 360 of 408

Thread: MB100 development

  1. #346
    Join Date
    19th October 2007 - 20:22
    Bike
    im a dreamer.
    Location
    hamilton
    Posts
    140
    ARgh.. lost what i typed out.

    Thanks again everyone.

    You are right Dave, bigger bike is better value. Its on the cards at some stage- I have had faster previously and my dream bike is probably an RS250 :-D

    The guys I ride with all have very small capacity bikes- It would actually be less fun having something that got from a-b without a screaming panic. At this stage its quicker than a px200 vespa and a few a100's (and similar yamaha thing) but those bikes are always getting faster.

    Actually used one of your old posts (in another thread) to choose spark plugs earlier today, Dave.

  2. #347
    Join Date
    16th January 2010 - 17:09
    Bike
    VFR400, Frankenbucket
    Location
    Otorohanga
    Posts
    2,665
    Quote Originally Posted by flyingbrick View Post
    ARgh.. lost what i typed out.

    Thanks again everyone.

    You are right Dave, bigger bike is better value. Its on the cards at some stage- I have had faster previously and my dream bike is probably an RS250 :-D

    The guys I ride with all have very small capacity bikes- It would actually be less fun having something that got from a-b without a screaming panic. At this stage its quicker than a px200 vespa and a few a100's (and similar yamaha thing) but those bikes are always getting faster.

    Actually used one of your old posts (in another thread) to choose spark plugs earlier today, Dave.
    Who's your crew? Should jump on my wifes GN250 (if I ever get it running right) and join yas for a blat.

  3. #348
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    20,500
    Blog Entries
    2
    Look I used to ride a lot of ks on an RG50 despite an 1100 in the garage.
    I did 6 cold kiwis on one. Small bikes are cool.

    And there's a fair few spare MB parts in case of a racing return.
    But,
    Don't you look at my accountant.
    He's the only one I've got.

  4. #349
    Join Date
    19th October 2007 - 20:22
    Bike
    im a dreamer.
    Location
    hamilton
    Posts
    140
    Quote Originally Posted by Autech View Post
    Who's your crew? Should jump on my wifes GN250 (if I ever get it running right) and join yas for a blat.
    I'll flick you a PM bro. Going out to Kawhia tomorrow i think.

  5. #350
    Join Date
    19th October 2007 - 20:22
    Bike
    im a dreamer.
    Location
    hamilton
    Posts
    140
    So where do i find a quality 57mm big bore kit and what kinda capacity does that take things out to?

  6. #351
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by flyingbrick View Post
    So where do i find a quality 57mm big bore kit and what kinda capacity does that take things out to?
    the 57 mm kit i linked last page
    or maybe not
    http://www.tvd-parts.nl/010480/en
    http://www.50cc.eu/en/product.asp?P=...ocilindro-57mm
    https://www.vsmotoparts.com/athena-c...honda-mb8-mt80
    https://www.google.co.nz/search?q=mb...0GFW0FQI-1FpM:

    i have no idea why its referred to as a 115cc kit by my maths it would be over 125cc
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  7. #352
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    20,500
    Blog Entries
    2
    Malcom bought one. Not sure if he used it but wasn't super happy with it, at least for a racing bassis. From memory the transfers were a little thin.
    Don't you look at my accountant.
    He's the only one I've got.

  8. #353
    Join Date
    19th October 2007 - 20:22
    Bike
    im a dreamer.
    Location
    hamilton
    Posts
    140
    good quality new condition motorcycle RD350 RXZ YZ125 DT175 intake reed valve for yamaha 175cc DT 175 air system spare parts
    https://s.click.aliexpress.com/e/caVeL5gT


    Cheap!

  9. #354
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by flyingbrick View Post
    good quality new condition motorcycle RD350 RXZ YZ125 DT175 intake reed valve for yamaha 175cc DT 175 air system spare parts
    https://s.click.aliexpress.com/e/caVeL5gT


    Cheap!
    Remember I will send yo one for free Dude cheaper........
    As for the pipe make one yourself.
    20 Gauge mild steel.
    go into mico metals and get some 75mm or 100mm thin wall irrigation pipe for the slenncer. Or free if you know a market gardener.
    I am happy to do a quick and nasty design for a stock cylinder and big carb and reed combo. But mikes will have access to better.
    Almost anything will be better than stock.
    But as i said Try and convince Speedpro to do a cylinder for you to suit he has vast experience in what works and what doesnt. Its very easy for someone not experienced to make it go slower.
    Mikes basic combo would double your power out put to 20 hp or a bit more.
    His full house race bike was over 3x stock.
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  10. #355
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by F5 Dave View Post
    Malcom bought one. Not sure if he used it but wasn't super happy with it, at least for a racing bassis. From memory the transfers were a little thin.
    Was it plated Dave?
    From what i have seen in the pics i agree with transfer shape and width.
    But theres no replacement for displacement as the yanks say.
    Also i doubt there is many left in the worldand i cant see anymore getting made but pistons are available and single ring.
    So if he wants one i would suggest he buys one now before they all disappear.
    Also the durations from what has been written std are incredibly mild i think more cooking than the H100 even.
    I have not seen Koba post for ages is he sprogging or something..

    Quote Originally Posted by koba View Post
    bump.
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  11. #356
    Join Date
    12th February 2004 - 10:29
    Bike
    bucket FZR/MB100
    Location
    Henderson, Waitakere
    Posts
    4,196
    KT100 bits go straight in. Pistons start at 52mm and are single ring. You could even have the crank rebuilt using all KT100 bits. Not sure on availability due to changes in karting. The deck height will need adjusting. If you lean on it even a little bit with compression and revs you will need an adjustable ignition. Ignitech is definitely the go and can obviously be transferred to the next bike if required. My Ignitech is now in my 4T scooter. An Ignitech system is a very good investment. Get a 2 channel DC CDI system. I only use one channel but could double them up but haven't seen the need. A built crank should be good for 14,000rpm but 12,000 should be plenty on the street.

  12. #357
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    20,500
    Blog Entries
    2
    Don't think it was plated, wasn't that long ago. He's running wgtn racing now in between being overseas.

    Yeah KT piston skim the barrel top as shorter but cheap and great quality.
    Don't you look at my accountant.
    He's the only one I've got.

  13. #358
    Join Date
    19th October 2007 - 20:22
    Bike
    im a dreamer.
    Location
    hamilton
    Posts
    140
    What do people here use for image hosting these days?

  14. #359
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by flyingbrick View Post
    What do people here use for image hosting these days?
    Post them direct on the KB server from your device.
    Not sure if you have enough posts to do that yet maybe.
    Nah you should
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  15. #360
    Join Date
    19th October 2007 - 20:22
    Bike
    im a dreamer.
    Location
    hamilton
    Posts
    140
    If this works you will see my new seat.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20181108_181217.jpg 
Views:	28 
Size:	854.4 KB 
ID:	339426  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •