Results 1 to 6 of 6

Thread: FXR sprockets' availability in Auckland?

  1. #1
    Join Date
    20th January 2008 - 17:29
    Bike
    1972 Norton Commando
    Location
    Auckland NZ's Epicentre
    Posts
    3,554

    FXR sprockets' availability in Auckland?

    I had a search and found a ratio calculator for the FXR 150, mine is 14/47 and I'd like to experiment with a smaller front. Where in Auckland would I get a 13 and or what other bikes ones would fit....keen to take the bucket out on Saturday if its not raining...
    I have a 49 rear so might fit that too as 1 on the front is about the same as 3 on the back....
    DeMyer's Laws - an argument that consists primarily of rambling quotes isn't worth bothering with.

  2. #2
    Join Date
    4th February 2005 - 07:32
    Bike
    Rattlecan blue
    Location
    Auckland
    Posts
    3,963
    Any bike shop. I think I'm running a 12 but can't remember.

  3. #3
    Join Date
    20th January 2008 - 17:29
    Bike
    1972 Norton Commando
    Location
    Auckland NZ's Epicentre
    Posts
    3,554

    Thumbs up

    Quote Originally Posted by Henk View Post
    Any bike shop. I think I'm running a 12 but can't remember.
    Cheers, I'll take it with me tomorrow and see what I can find.
    DeMyer's Laws - an argument that consists primarily of rambling quotes isn't worth bothering with.

  4. #4
    Join Date
    20th July 2010 - 07:56
    Bike
    RS/KE125, PW50
    Location
    Auckland
    Posts
    1,305
    As Henk said 12 tooth JT front available from any bike shop (next day delivery). There are range of sprockets that will fit from memory mine was listed for a RM80, you will need a spacer behind the sprocket as its not as wide as original FXR issue i.e. same spline same pitch but needs to be spaced out from the engine case. The 49 tooth will be too tall for Mt Wellington, 12 front 47 rear is an excellent starting combination.
    From memory the right front sprocket is a JTF1263 - 428 chain, but double check as I cant check mine at the moment. Link below will take you to these front sprockets
    http://www.jtsprockets.com/52.0.html...el_uid=5902&p=

  5. #5
    Join Date
    20th September 2008 - 12:50
    Bike
    XT660r
    Location
    Hastings
    Posts
    1,624
    Quote Originally Posted by Voltaire View Post
    I had a search and found a ratio calculator for the FXR 150, mine is 14/47 and I'd like to experiment with a smaller front. Where in Auckland would I get a 13 and or what other bikes ones would fit....keen to take the bucket out on Saturday if its not raining...
    I have a 49 rear so might fit that too as 1 on the front is about the same as 3 on the back....
    Common sprocket, same as RG150 and Kwaka KR150, probably more too

    We run a 12 one way at Roys Hill and 13 the other (cant remember which way, thats Tylers job) and a 15 with a TZ125 fairing at Manfeild and Taupo.

    I will post the sprocket numbers when I get them out of the spares box. I think some a JT like Kel mentioned before

    It had a 16 when we got it, was ready for Bonneville lol !
    Dale Kerrigan: If there's anything Dad loved more than serenity, it was a big two stroke engine on full throttle!

  6. #6
    Join Date
    18th May 2007 - 20:23
    Bike
    RG50 and 76 Suzuki GP125 Buckets
    Location
    Auckland
    Posts
    10,528
    Suzuki GP/TF/TS 100/125 fit the spline on fxr's as well as Honda CB/XL/SL 100/125's which also have a lock thing with two bolts, all are 428 chain from memory.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •