Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18

Thread: Virago XV250 baffles?

  1. #16
    Join Date
    24th September 2008 - 01:32
    Bike
    a shiny new(ish) one
    Location
    Dunedin
    Posts
    3,650
    Quote Originally Posted by re_animate View Post
    I've been considering messing with the baffles on my bike, I'm a new rider but I find my bike is a little too quiet for my liking.
    It's a Virago xv250. It's only 250cc, but I would like it to sound a little more grunty.

    The guy I bought it off recommended I take the baffles out all together, I've been doing tonnes of research and am left undecided.

    What if I just drilled holes in the baffles like this:
    http://www.youtube.com/watch?v=yB_Au6aLlJ8

    Would that have a massive impact on the performance/life/temp/etc of the bike?
    Would I need to re-jet the carb? How would I know?
    I don't want it to be too loud. After all, it's a 250 and i'm not fooling anyone haha.

    Cheers
    i went and checked out a virago 250 for a friend of a friend about 6 months ago. it has straight through slash cut pipes, and it actually sounded really really good, I was surprised.
    I took it for a decent test ride, and there wasnt any noticable loss that I could tell, and I have ridden several different viragos.

  2. #17
    Join Date
    31st December 2010 - 09:02
    Bike
    2007 ktm 300exc
    Location
    auckland
    Posts
    688
    Most just drill one hole first say 10mm take it for a ride , and adjust the volume by adding by adding more holes. A 10mm hole can easily be welded over if the need arises, drill the holes in a circular pattern. Doing this will not affect the jetting.

  3. #18
    Join Date
    26th February 2007 - 23:15
    Bike
    In the rubbish bin
    Location
    NZ
    Posts
    2,364
    Quote Originally Posted by re_animate View Post
    I've been considering messing with the baffles on my bike, I'm a new rider but I find my bike is a little too quiet for my liking.
    It's a Virago xv250. It's only 250cc, but I would like it to sound a little more grunty.

    The guy I bought it off recommended I take the baffles out all together, I've been doing tonnes of research and am left undecided.

    What if I just drilled holes in the baffles like this:
    http://www.youtube.com/watch?v=yB_Au6aLlJ8

    Would that have a massive impact on the performance/life/temp/etc of the bike?
    Would I need to re-jet the carb? How would I know?
    I don't want it to be too loud. After all, it's a 250 and i'm not fooling anyone haha.

    Cheers

    This question has been answered at least 5-10 times, with diagrams, pictures and linked youtube video.

    Use search function.
    Find out more at www.unluckyones.co.nz

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •