Page 4 of 101 FirstFirst ... 234561454 ... LastLast
Results 46 to 60 of 1514

Thread: Race chassis

  1. #46
    Join Date
    17th January 2005 - 12:14
    Bike
    2011 yz450f
    Location
    Featherston
    Posts
    4,025
    Quote Originally Posted by husaberg View Post
    Ivan did you read the whole article?

    http://www.supermononewsletter.co.uk...ermono-History
    yeah i read the whole article heaps just disected that part out for anyone intrested in building a frame and what not
    Blindspott are back as Blacklist check them out
    www.blacklistmusicnz.co.nz

  2. #47
    Join Date
    7th February 2009 - 17:47
    Bike
    93 kwacker zxr750
    Location
    palmerston north
    Posts
    1,705
    Quote Originally Posted by husaberg View Post
    Ivan did you read the whole article?

    http://www.supermononewsletter.co.uk...ermono-History
    l dont know why place's quote 250 mx bikes have these silly figgers when a good one is only 24hp . 450's put out the 48 hp type mark stock

  3. #48
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by crazy man View Post
    l dont know why place's quote 250 mx bikes have these silly figgers when a good one is only 24hp . 450's put out the 48 hp type mark stock
    Which is less than my old 501 Berg
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  4. #49
    Join Date
    17th January 2005 - 12:14
    Bike
    2011 yz450f
    Location
    Featherston
    Posts
    4,025
    Quote Originally Posted by crazy man View Post
    l dont know why place's quote 250 mx bikes have these silly figgers when a good one is only 24hp . 450's put out the 48 hp type mark stock
    yeah the figures are crazy what they put out
    Blindspott are back as Blacklist check them out
    www.blacklistmusicnz.co.nz

  5. #50
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017

    As we are talking Super Mono's

    This was my attempt at building a big single but I hated the damn thing
    Motor was a KLR600 tuned by Mike Hatheral, it had a high comp piston, megacycle cam and was heavily worked on the head, I ran a humongous Dellorto carb. The chassis was the reason for my loathing, it was an early TZR 250 and it had serious head shaking problems, and I mean it would go into a massive tank slappers that could cause involuntary bowel movements, the only thing that made it ride-able was a fully set steering damper.
    The pictures are my before and after a round up in sunny Cadwell park in March.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Cadwell march KLR600.jpg 
Views:	134 
Size:	275.8 KB 
ID:	254036   Click image for larger version. 

Name:	KLR600 TZR250 after crash.jpg 
Views:	162 
Size:	374.9 KB 
ID:	254038  

  6. #51
    Join Date
    7th September 2009 - 09:47
    Bike
    Yo momma
    Location
    Podunk USA
    Posts
    4,562
    Quote Originally Posted by husaberg View Post
    Which is less than my old 501 Berg
    and my (since sold) 1981 MAico 490
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_2820.jpg 
Views:	69 
Size:	511.9 KB 
ID:	254062  

  7. #52
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by jasonu View Post
    and my (since sold) 1981 MAico 490
    Less than my CR500 as well
    Curiously this also old banger below has more hp as well.
    So much for progress.

    No the Manx is not mine although i wish it was.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Manx norton.JPG 
Views:	80 
Size:	192.7 KB 
ID:	254064   Click image for larger version. 

Name:	CR500AFSM2.jpg 
Views:	159 
Size:	302.6 KB 
ID:	254065   Click image for larger version. 

Name:	CR500AFSM.jpg 
Views:	177 
Size:	381.7 KB 
ID:	254066  
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  8. #53
    Quote Originally Posted by cotswold View Post
    This was my attempt at building a big single but I hated the damn thing
    Motor was a KLR600 tuned by Mike Hatheral, it had a high comp piston, megacycle cam and was heavily worked on the head, I ran a humongous Dellorto carb. The chassis was the reason for my loathing, it was an early TZR 250 and it had serious head shaking problems, and I mean it would go into a massive tank slappers that could cause involuntary bowel movements, the only thing that made it ride-able was a fully set steering damper.
    The pictures are my before and after a round up in sunny Cadwell park in March.
    Is a fibreglass tank cover I spy? or just the stock tank with the underside cut out.
    I was going to redo my fibreglass one but if someone has a mold sitting around it would ber seriously handy.

  9. #54
    Join Date
    7th September 2009 - 09:47
    Bike
    Yo momma
    Location
    Podunk USA
    Posts
    4,562
    Quote Originally Posted by husaberg View Post
    Less than my CR500 as well
    Curiously this also old banger below has more hp as well.
    So much for progress.

    No the Manx is not mine although i wish it was.
    Why does your CR500 have Bucket wheels???

  10. #55
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by jasonu View Post
    Why does your CR500 have Bucket wheels???
    It came with them I am pretty sure they are CBR400 but not totally they are from memory 3 and 4 inch
    But you are on to my cunning plan.

    Insert engine into rs or Nsr chassis put on full fairing and lets go bucket racing
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  11. #56
    Join Date
    4th February 2005 - 07:32
    Bike
    Rattlecan blue
    Location
    Auckland
    Posts
    3,963
    I thought it may have been an extra capacity allowance for two strokes under sup regs to give the oil burners a chance angainst the diesels.

  12. #57
    Join Date
    19th December 2008 - 20:22
    Bike
    2001 Suzuki FXR150
    Location
    Upper Hutt, Wellington
    Posts
    86
    Quote Originally Posted by Henk View Post
    I thought it may have been an extra capacity allowance for two strokes under sup regs to give the oil burners a chance angainst the diesels.
    I'm for that, lets allow unrestricted 125cc water cooled two strokes. Obviously not purpose buit racers though.
    Hilleye

    If it doesn't bring a tear to your eye, add a little more fully synth 2T to the mix.

  13. #58
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017
    Quote Originally Posted by Moooools View Post
    Is a fibreglass tank cover I spy? or just the stock tank with the underside cut out.
    I was going to redo my fibreglass one but if someone has a mold sitting around it would ber seriously handy.
    Just the original cut out with a small ally one underneath

  14. #59
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823

    Looks like Foale was beaten to the spine

    I am not totally sure it is a spine but it sure looks like it is.

    Colin Seeley sure did some beautiful frames (never did go much for his seats though
    Straight tubes from the steering head was his later trademark as in modern designs.
    Made a few frames for the works racers as well.
    He also in collaboration did one of the first Monoque race frames as well. I think he bet Norton with the JPS

    This Norton F type 1955 also predates Foale by a number of years.
    Moto Guzzi probably predates his and Scott predates Guzzi and so forth.

    I have added the Paul Dunstall "Drainpipe" frame because i mainly see it as a amalgamation of both and i love the pipes.
    http://www.youtube.com/watch?v=QreNam7_wmY
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Qub 6.jpg 
Views:	105 
Size:	429.0 KB 
ID:	254116   Click image for larger version. 

Name:	Seely mk4.JPG 
Views:	93 
Size:	377.3 KB 
ID:	254117   Click image for larger version. 

Name:	F type norton frame.JPG 
Views:	124 
Size:	185.5 KB 
ID:	254208   Click image for larger version. 

Name:	Dunstall drainpipe frame.JPG 
Views:	409 
Size:	284.3 KB 
ID:	254210  
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  15. #60
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823

    Rake and Trail calculator

    Rake and Trail calculator

    Not a bad site a bit of every thing some useful stuff its in my top 20.

    http://www.rbracing-rsr.com/advchoppercalc.html

    Grumph sent me this name the date of this frame no prizes for the manufacturer for anyone over 30 that's obvious, but the date may surprise a few.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	frame pic date it if you dare.jpg 
Views:	145 
Size:	432.0 KB 
ID:	254368  
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •