Results 1 to 5 of 5

Thread: GN250 engine and assorted bits

  1. #1
    Join Date
    18th May 2005 - 09:30
    Bike
    '08 DR650
    Location
    Methven
    Posts
    5,255

    GN250 engine and assorted bits

    Motor - Complete and running when I removed it from an early 80's GN250 at the begining of last year. Not in great condition, clutch slips, has a leak or two, probably needs the camchain replaced, starter motor isnt bolted on etc. Stator is good! (Had to replace that when I kept running out of electrical smoke)

    To go with the above:
    Spare Clutch basket and plates
    Starter motor
    Bottom end w piston & cylinder, assorted motor bits
    Exhaust system

    - Free to a good home, would probably go alright in a go kart or for learning about these indestructible* engines


    Other parts:

    A second bottom end - free

    1 x exhaust, has been sprayed black with high temp paint but could do with a second coat. - $10

    1 x Master cylinder, line and caliper - offers?

    1982 Drum brake front end inc wheel, forks, triples, gauges, drum brake. Axle has been misplaced but might surface in the tidy up. - offers?

    Rear shocks, condition unknown. - free

    Spare Indicator lenses - $5 each

    Parts will be available between 3-10 Jan

    *I have nuked two


  2. #2
    Join Date
    28th August 2005 - 19:37
    Bike
    MT09 Tracer
    Location
    New Plymouth Taranaki
    Posts
    1,552
    What's the condition of the caliper - could be interested if piston is not pitted.
    Suck, Squeeze, Bang, Blow aren’t just the 4 cycles of an engine

  3. #3
    Join Date
    18th May 2005 - 09:30
    Bike
    '08 DR650
    Location
    Methven
    Posts
    5,255
    Quote Originally Posted by nadroj View Post
    What's the condition of the caliper - could be interested if piston is not pitted.
    I'll take a look when I get back on the 3rd and pm you


  4. #4
    Join Date
    4th February 2005 - 07:32
    Bike
    Rattlecan blue
    Location
    Auckland
    Posts
    3,963
    Could be keen on a carb if you have one and a front master cylinder ditto.
    PM me with what you want for them if you like.

  5. #5
    Join Date
    30th December 2011 - 04:21
    Bike
    1986 Suzuki GN 250
    Location
    Auckland
    Posts
    2

    Side covers

    Hi,

    Any chance you have side covers for the GN? (black with red and gold strips [1986 model])

    Cheers

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •