North Island Series Round 4 entry form

[Dutchee]

Bullshit, would never happen.

What? Hels counting or you injuring yourself before even getting the bikes out the van? Disagree on the first one, but you've proven you're totally capable of the 2nd one, so can't dispute that fact bwahahaha

[SHELRACING]

Saturday 7 to Sunday 8 Apr 2012

Kaitoke Kart Track, Upper Hutt. Practice and Qualifying from noon on the Saturday main races Sunday.
3 races per class, A-Grade 10 Lap, 20 Lap, 30 Lap each meeting. B-grade Laps by negotiation and/or bribery.
Points as per the MNZ Miniature Road Race rules.

Bikes to conform to MNZ noise and tech specs. Bikes to fully conform to nylon track protection as expected and well known by all. (If not ask eh!)

Race numbers MUST be easy to read on the front and rear tail piece. We prefer two digits if possible

Entry fee $30 per day. The Entry Form is here. You can download, fill in, save and email this PDF back to us.
Email it to Race Entry.

While you were all having a great time at Taupo (wish we had been there ) I finally got to track test my new bucket, It's been 2 years at least since I have been on the track.

Anyway we are heading off to Kaitoke for our comeback meeting and looking forward to it. I still have a bit of tidying up work to do on the bikes. RE Plastics, I have done all the usual Froks, swingarms and footpegs. Do the handlebars have to have plastics as well or just closed ends. My bars are sealed at the end and I would have to drill them out or something. I don't want to get down there and find we are not compliant.

Any other setup and compliance issues to be aware of ??

Cheers
Steve

[F5 Dave]

Any metal part that can touch the track, so handle bars especially.