Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: Are better quality mufflers straight through?

  1. #1
    Join Date
    20th June 2011 - 20:27
    Bike
    Dog Rooter, 1290 SDR
    Location
    Marton
    Posts
    9,851

    Are better quality mufflers straight through?

    Was looking at an unbranded muffler today and it was straight through, was told it was a good one and had a good tone.

    Are better quality mufflers like this? Ive not seen one off a bike.

    I dont think my stock ones are straight through.
    Quote Originally Posted by Katman View Post
    but once again you proved me wrong.
    Quote Originally Posted by cassina View Post
    I was hit by one such driver while remaining in the view of their mirror.

  2. #2
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    I had a straight through Moriwaki on my Bros650, worked well and a reputable brand, amazing sound.
    My ZZR600 had twin Neptune cans, straight through, worked well, sounded good.
    My VT250 spada had several 'zorsts: standard, crap.
    Debaffled stock 'zorst, crap, sounded better...
    Reverse megaphone: ont too bad, got "good" power gain with jetting and fuck it was loud!
    Twin cans, chopped/gutted/straight through made from standard cans: Worked the bestestest and sounded good.

    It also depends on what you want in terms of power delivery, but I think many decent quality ones are straight through.
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  3. #3
    Join Date
    3rd October 2004 - 17:35
    Posts
    6,390
    edit .

  4. #4
    Join Date
    16th September 2004 - 16:48
    Bike
    PopTart Katoona
    Location
    CT, USA
    Posts
    6,542
    Blog Entries
    1
    Horses for courses.
    I have had all types, and now I am starting to go back to more restrictive flow ones. Makes the bike more useable (I have a baby at home).
    Performance wise the gains can be lost through various other things anyway.

    The really loud pipes I have had on various bikes just piss you off after a while.........cruising on the motorway at 4,000 RPM only to arrive at your destination and to have a crappy time due to the dull hummmmmmmm in your head and asking everyone "WHAT?!" when they talk to you.

    I'm all for a good note, but I prefer a nice ride any day.
    Reactor Online. Sensors Online. Weapons Online. All Systems Nominal.

  5. #5
    Join Date
    20th June 2011 - 20:27
    Bike
    Dog Rooter, 1290 SDR
    Location
    Marton
    Posts
    9,851
    Quote Originally Posted by avgas View Post
    Horses for courses.
    I have had all types, and now I am starting to go back to more restrictive flow ones. Makes the bike more useable (I have a baby at home).
    Performance wise the gains can be lost through various other things anyway.

    The really loud pipes I have had on various bikes just piss you off after a while.........cruising on the motorway at 4,000 RPM only to arrive at your destination and to have a crappy time due to the dull hummmmmmmm in your head and asking everyone "WHAT?!" when they talk to you.

    I'm all for a good note, but I prefer a nice ride any day.
    I get that, fair call.
    Quote Originally Posted by Katman View Post
    but once again you proved me wrong.
    Quote Originally Posted by cassina View Post
    I was hit by one such driver while remaining in the view of their mirror.

  6. #6
    Join Date
    25th April 2009 - 17:38
    Bike
    RC36, RC31, KR-E, CR125
    Location
    Manawatu
    Posts
    7,364
    As avgas says, horses for courses. Worth mentioning a lot of people swear by the supertrapp style for power and queitness. Personally I think a well designed straight through muffler is the way to go; better tone and power than the other types, and can be very quiet. In fact my flatmate who has hearing sensitive enough to make her swear at flies, often doesn't even notice me coming or going on my bike. Mine is a 280mm long oval can with twin perf tubes, after a very long midpipe.
    "A shark on whiskey is mighty risky, but a shark on beer is a beer engineer" - Tad Ghostal

  7. #7
    Join Date
    24th June 2004 - 17:27
    Bike
    So old you won't care
    Location
    Kapiti
    Posts
    7,880
    There are only 3 'types' of mufflers

    Absorption Muffler: This design is most commonly used by performance muffler manufacturers as it gives the least resistance to the exhaust gases that pass through. Absorption mufflers work by using a straight perforated tube that's en-cased or wrapped in sound deadening material. In this design, the exhaust gases are able to pass through with almost no resistance while the various frequencies of sounds contained in the gases are absorbed by the material around the perforated tube. Typical materials used for sound deadening are fiberglass, stainless steel mesh and ceramics.

    Diffusion Muffler: A diffusion muffler splits the flow of the exhaust gases up into a series of different paths using a series of plates and tubes called baffles. These baffles cause the exhaust to follow a longer path when passing through the muffler. As the exhaust twists its way through these series of tubes and plates, it looses velocity (energy) and in so doing, several sound frequencies are lost and reflected. This in turn tunes the exhaust note that exits the muffler.

    Hemholtz Chamber: Also popularly called a Cancellation Muffler or Resonator. This form of muffler derives its name from the German Scientist, Herman Hemholtz, who made several discoveries in the field of acoustics and medicine. The Hemholtz chamber is designed very carefully to be a specific volume and length. As the sounds in the exhaust gases enter on one end, a resonant frequency is established in the chamber that causes all other sounds at that specific frequency to be cancelled out. As this type of muffler only cancels out one frequency in the exhaust, they are rarely used by themselves, but in conjunction with a Diffusion or Absorption Muffler.

  8. #8
    Join Date
    6th June 2008 - 17:24
    Bike
    The Vixen - K8 GSXR600
    Location
    Behind keybd in The Tron
    Posts
    6,518
    Wot avgas said. I got pissed off with loud exhausts too after a while.
    . “No pleasure is worth giving up for two more years in a rest home.” Kingsley Amis

  9. #9
    Join Date
    25th January 2007 - 10:06
    Bike
    '14 Multistrada 1200S
    Location
    palmy
    Posts
    3,759
    Quote Originally Posted by Paul in NZ View Post
    There are only 3 'types' of mufflers

    Absorption Muffler: This design is most commonly used by performance muffler manufacturers as it gives the least resistance to the exhaust gases that pass through. Absorption mufflers work by using a straight perforated tube that's en-cased or wrapped in sound deadening material. In this design, the exhaust gases are able to pass through with almost no resistance while the various frequencies of sounds contained in the gases are absorbed by the material around the perforated tube. Typical materials used for sound deadening are fiberglass, stainless steel mesh and ceramics.

    Diffusion Muffler: A diffusion muffler splits the flow of the exhaust gases up into a series of different paths using a series of plates and tubes called baffles. These baffles cause the exhaust to follow a longer path when passing through the muffler. As the exhaust twists its way through these series of tubes and plates, it looses velocity (energy) and in so doing, several sound frequencies are lost and reflected. This in turn tunes the exhaust note that exits the muffler.

    Hemholtz Chamber: Also popularly called a Cancellation Muffler or Resonator. This form of muffler derives its name from the German Scientist, Herman Hemholtz, who made several discoveries in the field of acoustics and medicine. The Hemholtz chamber is designed very carefully to be a specific volume and length. As the sounds in the exhaust gases enter on one end, a resonant frequency is established in the chamber that causes all other sounds at that specific frequency to be cancelled out. As this type of muffler only cancels out one frequency in the exhaust, they are rarely used by themselves, but in conjunction with a Diffusion or Absorption Muffler.
    You learn something new every day.
    F M S

  10. #10
    Join Date
    16th September 2004 - 16:48
    Bike
    PopTart Katoona
    Location
    CT, USA
    Posts
    6,542
    Blog Entries
    1
    Quote Originally Posted by slofox View Post
    Wot avgas said. I got pissed off with loud exhausts too after a while.
    WHAT??????!!!!!!!! Sorry I really need to get the Yoshi repacked, your going to have to speak up
    Reactor Online. Sensors Online. Weapons Online. All Systems Nominal.

  11. #11
    Join Date
    6th June 2008 - 17:24
    Bike
    The Vixen - K8 GSXR600
    Location
    Behind keybd in The Tron
    Posts
    6,518
    Quote Originally Posted by avgas View Post
    WHAT??????!!!!!!!! Sorry I really need to get the Yoshi repacked, your going to have to speak up
    EH? I'm a bit deaf after that bike!
    . “No pleasure is worth giving up for two more years in a rest home.” Kingsley Amis

  12. #12
    Join Date
    5th February 2008 - 13:07
    Bike
    2006 Hyosung GT650R
    Location
    BOP
    Posts
    7,141
    I used to wear earplugs all the time, until I got a loud pipe. Now the music is just too good to block it with earplugs.

    All the loud(ish) pipes I've seen have been straight-through types.
    "I am a licenced motorcycle instructor, I agree with dangerousbastard, no point in repeating what he said."
    "read what Steve says. He's right."
    "What Steve said pretty much summed it up."
    "I did axactly as you said and it worked...!!"
    "Wow, Great advise there DB."
    WTB: Hyosung bikes or going or not.

  13. #13
    Join Date
    13th March 2006 - 20:49
    Bike
    TF125
    Location
    Hurunui, FTW!
    Posts
    4,430
    Quote Originally Posted by DangerousBastard View Post
    I used to wear butplugs all the time, until I got a loud pipe. Now the music is just too good to block it with butplugs.

    All the loud(ish) pipes I've seen have been straight-through types.
    Hey, DB! Where you been bro?

  14. #14
    Join Date
    11th June 2011 - 16:30
    Bike
    Honda vfr 750 fn 1992 x2 90red
    Location
    palmerston north
    Posts
    1,767
    Blog Entries
    7

    Smile

    Quote Originally Posted by avgas View Post
    Horses for courses.
    I have had all types, and now I am starting to go back to more restrictive flow ones. Makes the bike more useable (I have a baby at home).
    Performance wise the gains can be lost through various other things anyway.

    The really loud pipes I have had on various bikes just piss you off after a while.........cruising on the motorway at 4,000 RPM only to arrive at your destination and to have a crappy time due to the dull hummmmmmmm in your head and asking everyone "WHAT?!" when they talk to you.

    I'm all for a good note, but I prefer a nice ride any day.
    yes me too hes 2 yrs old know loves the bikes . yeah agree the vfr 750 sounds good with two bros pipe , but quite is nice

    you dont have wheel bike down driveway to start it , after living in noisey street you get over the exhust sounds waking early hours

    Is that dam low end rumble yuk. have to agree on trip my cbx 400 4 n 1 was dam anoying witht hat drone aghhh

    twins sound better in that reguard , but dont see point of lound just to be lound. keep to the track i say

    I ended up taking the 4 n 1 pipe of going back to custom made standred pipes that had chromed myself at work

    Mind you pipes are better mad these days sound better too , my old cb 400 n sounded so boring like lawn mower

    they said review i read that went out to airport to record jet taking of for cbx 1000 honda pipes and must recored the air port lawn mower

    by accident for my old bike grrr stoped reading the review hehe

  15. #15
    Join Date
    5th February 2008 - 13:07
    Bike
    2006 Hyosung GT650R
    Location
    BOP
    Posts
    7,141
    Quote Originally Posted by Madness View Post
    Hey, DB! Where you been bro?
    Hey man, just been sorting shit, including my shit head.
    "I am a licenced motorcycle instructor, I agree with dangerousbastard, no point in repeating what he said."
    "read what Steve says. He's right."
    "What Steve said pretty much summed it up."
    "I did axactly as you said and it worked...!!"
    "Wow, Great advise there DB."
    WTB: Hyosung bikes or going or not.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •