About 14 using the regulator fitted to it when I sold it.
On my 100 it powered the ignitech and a reasonable water pump and you could rev it through the gears on the dyno with a meter over the capacitor and it would not drop from there.
Must use a capacitor on output. I did put battery leads on as well so you could plug in a battery so could talk to ignitech when not running.
Without the battery it would push start immediately. They are a great stator and used to be cheap on Ebay but those days are gone. There were some CR125 rotors that were only 4 pole.
Don't you look at my accountant.
He's the only one I've got.
i am pretty sure the Ktm 125 -300 stator use the same Kokistan with 25 watts on various models.
they are the same make and are the same size so i am guessing they are the same stators only different outputs for different uses2k1 you see on the SX models
2k2 you see on the MXC models
2k3 you see on the EXC models
http://www.cafehusky.com/threads/08-...-do-that.2755/
you can get aftermarket lighting coild for them pretty cheap as the KTm are current bikes
Building a er6 race bike and want a light flywheel to run the injection pump
i'm over buckets
.
Looking Good......
So can you fit the dirty great chamber on it?
Don't you look at my accountant.
He's the only one I've got.
had a feeling they were Excesior
i thought autocycle refered to the engine
Yowling posted a pic of the Angloitailian one he had that was from memory designed by Vincent Piatti
that was whell driven clip on cyclemotor
that engine i assume is villiers by the flywheel they would have sold the engine to whoever wanted to build them.
have a look through here
https://onlinebicyclemuseum.co.uk/to...s-motorcycles/
but then again here is a Norman nippy which looks bang on that shape of the bottom of the tank is the same but i am only looking at a few pictures for a second.
the forks and the wheel and maybe the as well as the frames wheels or hubs and even guards could be proprietary components much like mikuni and keihin delorto carbs brembo nissan calipers and showa mazacooci KYB forks
There are so meany combos to this bike . The frame prombly stays mostly the same . But yet. Forks, stands,seat stands,tank ,etc change on these bikes .some company pumped these bikes out
i'm over buckets
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks