Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Excessive tyre wear

  1. #1
    Join Date
    20th March 2008 - 09:55
    Bike
    The Conscience
    Location
    Wainuiomata
    Posts
    363

    Excessive tyre wear

    Help,

    I just had to replace the rear on my 1200 Bandit after only 3000Km the edges (outside 1/3 on each side) were totally worn out. Now I travel the wainuiomata hill every day which has that super grip stuff on it and I know it is like putting a grinder to the wheel but this seems a bit excessive. Any suggestions on shock settings etc.

    I am a big guy, but I have recently dropped to 125Kg from 180Kg and the wear is worse than ever.

    Any ideas anyone?
    "It is by will alone I set my mind in motion"



  2. #2
    Join Date
    13th February 2004 - 06:46
    Bike
    Forza 155 SE Pit Bike
    Location
    Wellington
    Posts
    11,471
    Slow down Rossi.
    Vote David Bain for MNZ president

  3. #3
    Join Date
    27th February 2005 - 08:47
    Bike
    a red heap
    Location
    towel wronger
    Posts
    6,522
    put some air in your next tyre.

  4. #4
    Join Date
    19th April 2009 - 18:52
    Bike
    SF
    Location
    Hamiltron
    Posts
    1,847
    OEM tyre?

    10 chars

  5. #5
    Join Date
    25th October 2002 - 17:30
    Bike
    GSXR1000
    Location
    Christchurch
    Posts
    9,291
    Quote Originally Posted by White trash View Post
    Slow down Rossi.
    Unfortunately that saying is almost irrelevant now...

  6. #6
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    Quote Originally Posted by nodrog View Post
    put some air in your next tyre.
    What this fellow said.
    Maybe wind up the rear preload too?
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  7. #7
    Join Date
    12th September 2009 - 16:14
    Bike
    .
    Location
    .
    Posts
    1,750
    What kind of milage have you got out of rear tyres in the past?

  8. #8
    Join Date
    7th October 2011 - 20:01
    Bike
    bike sold :-(
    Location
    napier
    Posts
    406
    Quote Originally Posted by GTRMAN View Post
    Help,

    I just had to replace the rear on my 1200 Bandit after only 3000Km the edges (outside 1/3 on each side) were totally worn out. Now I travel the wainuiomata hill every day which has that super grip stuff on it and I know it is like putting a grinder to the wheel but this seems a bit excessive. Any suggestions on shock settings etc.

    I am a big guy, but I have recently dropped to 125Kg from 180Kg and the wear is worse than ever.

    Any ideas anyone?
    What brand any type of tyre, as if you had a track day tyre on the bandit 3000km whould be good milage.

  9. #9
    Join Date
    20th March 2008 - 09:55
    Bike
    The Conscience
    Location
    Wainuiomata
    Posts
    363
    Road pilot 2, running at 42psi, checked weekly.

    I generally get about 5000Km per set of tyres

    I have the preload set to 6 on the 7 position adjuster.

    could it be that it is set to high?
    "It is by will alone I set my mind in motion"



  10. #10
    Join Date
    7th October 2011 - 20:01
    Bike
    bike sold :-(
    Location
    napier
    Posts
    406
    might be the factory your pilot 2 was made in. Michelin have factories all over the world and when a new tyre comes out ie road 3s they get the older tyres made in there second string factories and they are never as good as when they are made in there main factories. When I was selling bike tyres for a living you could see the diffrence in the michelins depending what factory they came from and that was brand new on the shelf. On some thing like your bandit I would be recomending a steel belted rear for milage and the michelins arn't steel belted so don't do the milage of other brands. Dunlop bridgestone Pirelli avon and metzeler all do a good sport tourer with a steel belt, might be worth trying.

  11. #11
    Join Date
    9th May 2008 - 21:23
    Bike
    A
    Location
    B
    Posts
    2,547
    Quote Originally Posted by spanner spinner View Post
    might be the factory your pilot 2 was made in. Michelin have factories all over the world and when a new tyre comes out ie road 3s they get the older tyres made in there second string factories and they are never as good as when they are made in there main factories. When I was selling bike tyres for a living you could see the diffrence in the michelins depending what factory they came from and that was brand new on the shelf. On some thing like your bandit I would be recomending a steel belted rear for milage and the michelins arn't steel belted so don't do the milage of other brands. Dunlop bridgestone Pirelli avon and metzeler all do a good sport tourer with a steel belt, might be worth trying.
    That sounds like a fair idea. The aluminium chip that is used to stop the locals from falling off the tarseal is hellish though. I use it to scrub in new tyres, couple of trips over the Wainui hill and the tyres look like you've been at a track day...

    If you've trashed a Pilot Road 2 rear in 3000kms then a Pilot Road 3 will not even get that far. Might be time for a Metzeler Z8?

  12. #12
    Join Date
    20th June 2011 - 20:27
    Bike
    Dog Rooter, 1290 SDR
    Location
    Marton
    Posts
    9,851
    Quote Originally Posted by spanner spinner View Post
    might be the factory your pilot 2 was made in. Michelin have factories all over the world and when a new tyre comes out ie road 3s they get the older tyres made in there second string factories and they are never as good as when they are made in there main factories. When I was selling bike tyres for a living you could see the diffrence in the michelins depending what factory they came from and that was brand new on the shelf. On some thing like your bandit I would be recomending a steel belted rear for milage and the michelins arn't steel belted so don't do the milage of other brands. Dunlop bridgestone Pirelli avon and metzeler all do a good sport tourer with a steel belt, might be worth trying.
    Interesting info. Ive just got a Bandit 1200 with near new Avon Storms on it. Im a bit worried about going through tyres quickly as people seem to on Bandits. What a good tyre that lasts well on them then? Im no Rossi type rider but I certainly use all of a tyre.

    I hope what the Avons last well. What pressure should I be running? Ive got her at 36psi as stated in the owners manual.
    Quote Originally Posted by Katman View Post
    but once again you proved me wrong.
    Quote Originally Posted by cassina View Post
    I was hit by one such driver while remaining in the view of their mirror.

  13. #13
    Join Date
    27th November 2003 - 12:00
    Bike
    None any more
    Location
    Ngaio, Wellington
    Posts
    13,111
    Quote Originally Posted by nzspokes View Post
    I hope what the Avons last well. What pressure should I be running? Ive got her at 36psi as stated in the owners manual.
    Use the manufacturer's fitment guide if you want a good reference. You'll find that online easily enough. 36psi is way too soft for a rear tyre on a Bandit.
    "Standing on your mother's corpse you told me that you'd wait forever." [Bryan Adams: Summer of 69]

  14. #14
    Join Date
    20th June 2011 - 20:27
    Bike
    Dog Rooter, 1290 SDR
    Location
    Marton
    Posts
    9,851
    Quote Originally Posted by Hitcher View Post
    Use the manufacturer's fitment guide if you want a good reference. You'll find that online easily enough. 36psi is way too soft for a rear tyre on a Bandit.
    Well im a fat bastard, so 42?
    Quote Originally Posted by Katman View Post
    but once again you proved me wrong.
    Quote Originally Posted by cassina View Post
    I was hit by one such driver while remaining in the view of their mirror.

  15. #15
    Join Date
    31st March 2005 - 02:18
    Bike
    CB919, 1090R, R1200GSA
    Location
    East Aucks
    Posts
    10,499
    Blog Entries
    140
    Quote Originally Posted by nzspokes View Post
    Well im a fat bastard, so 42?
    36F 42R are common pressures for some of the large capacity Honda bikes... find your model's recommended pressures by your manufacturer. Should be somewhere on the bike, often the swingarm.

    Keeping that in mind, check the tyres' maximum pressure rating (stamped on sidewall) comply, or back off to these pressures. ie, for my BMW, loaded pressures are 36F 40R, but the tyres I've just had fitted take a maximum pressure of 36, so I put 34F and 36R.
    Quote Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
    It's barking mad and if it doesn't turn you into a complete loon within half an hour of cocking a leg over the lofty 875mm seat height, I'll eat my Arai.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •