Page 15 of 22 FirstFirst ... 51314151617 ... LastLast
Results 211 to 225 of 321

Thread: RGV250 rebuild?

  1. #211
    Join Date
    12th February 2012 - 16:34
    Bike
    89 GS500, 89 ZXR400, 93 RGV250, 14 MT07
    Location
    Christchurch
    Posts
    818
    The battery is shit, thats seems like a good theory, thanks

  2. #212
    Join Date
    5th April 2004 - 20:04
    Bike
    Exxon Valdez
    Location
    wellington
    Posts
    13,381
    They always run like shit with a bung battery. Seen peoe chase phantom rgv issues for ages to find that it was a simple low voltage prob.

  3. #213
    Join Date
    17th February 2005 - 11:36
    Bike
    Bikes!
    Location
    Christchurch
    Posts
    9,649
    Yes, a healthy battery is mandatory on RGVs and RS'.

  4. #214
    Join Date
    4th July 2009 - 11:00
    Bike
    bucket
    Location
    Auckland
    Posts
    18
    Hi, I have finished my RGV build just got to run it in next weekend and maybe put it on a dyno,

    how do you add photos?

  5. #215
    Join Date
    12th February 2012 - 16:34
    Bike
    89 GS500, 89 ZXR400, 93 RGV250, 14 MT07
    Location
    Christchurch
    Posts
    818
    i just upload them to flickr then link them to here with the the "insert image" button

  6. #216
    Join Date
    4th July 2009 - 11:00
    Bike
    bucket
    Location
    Auckland
    Posts
    18





  7. #217
    Join Date
    4th July 2009 - 11:00
    Bike
    bucket
    Location
    Auckland
    Posts
    18
    has this worked? its not showing up!

  8. #218
    Join Date
    17th February 2005 - 11:36
    Bike
    Bikes!
    Location
    Christchurch
    Posts
    9,649


  9. #219
    Join Date
    17th July 2005 - 22:28
    Bike
    Dougcati, Geoff and Suzi
    Location
    Banjo town
    Posts
    10,162
    Quote Originally Posted by imdying View Post
    Sexual imaging
    Oh...my...fuck.
    Yes!
    Quote Originally Posted by Paul in NZ View Post
    Ha...Thats true but life is full horrible choices sometimes Merv. Then sometimes just plain stuff happens... and then some more stuff happens.....




    Alloy, stainless and Ti polishing.
    Bling your bike out!
    PM me

  10. #220
    Join Date
    12th February 2012 - 16:34
    Bike
    89 GS500, 89 ZXR400, 93 RGV250, 14 MT07
    Location
    Christchurch
    Posts
    818
    Shes a beauty.

    Rode to Akaroa today and the bike was still playing up. It would fart around at revs below 8k then take off.
    I replaced the battery and tried another sapc but it hasnt seemed to do anything.
    I will try another CDI unit and give the carbs a clean.



    I also managed to loose my pillion seat somewhere on the way back from Akaroa, anyone have a spare?

  11. #221
    Join Date
    10th September 2008 - 22:00
    Bike
    Smokers and a tractor
    Location
    Wanganui
    Posts
    969
    Quote Originally Posted by Asher View Post
    Shes a beauty.

    Rode to Akaroa today and the bike was still playing up. It would fart around at revs below 8k then take off.
    I replaced the battery and tried another sapc but it hasnt seemed to do anything.
    I will try another CDI unit and give the carbs a clean.
    Quote Originally Posted by imdying View Post

    Tell us about your setup (I'm pretty lazy):
    - 22D30?
    - 34MM carbs?
    - Which jets?
    - Using the solenoids? (plumbed up as per manual?)
    - Any airbox mods? (dump them if you have)
    - Which pipes?

    The 280/270 jets are probably fine, but there's a few odd carb models so you want to be double checking that stuff at the very least.

    If you have no luck with carb clean and cdi swap then it's time to go back a few steps as farting around under 8 thou is too vague a description to go off.
    It got you to Akaroa so unless you were redlining it all the way was she able to pull through these revs at quarter,half,full throttle?or was there just a bloody great hole in the power before the PV's opened up? (Thats if they are opening/fully closing...it always pays to check again)
    These bikes don't make much below 7000 revs anyway and aftermarket pipes can make them worse on the road.

    So if need be post up as per imdying questions above.

  12. #222
    Join Date
    12th February 2012 - 16:34
    Bike
    89 GS500, 89 ZXR400, 93 RGV250, 14 MT07
    Location
    Christchurch
    Posts
    818
    Well accelerating and cruising through the first 4 gears it would stutter a bit before it hits full power and turns into a rocket but for 5 and 6th unless i was in power band i wasnt going anywhere (it was easier to cruise at 100km in 4th than in 6th )

    Ive tried using 22D00 and 22D20
    34mm carbs
    Not too sure what jets i have in them.
    The air solenoids are plumbed up correctly (i think). What symptoms would i have if they werent?
    Stock air box
    No idea what pipes they are, they arent stock but they have no stamps to say what they are.

  13. #223
    Join Date
    10th September 2008 - 22:00
    Bike
    Smokers and a tractor
    Location
    Wanganui
    Posts
    969
    Quote Originally Posted by Asher View Post
    Well accelerating and cruising through the first 4 gears it would stutter a bit before it hits full power and turns into a rocket but for 5 and 6th unless i was in power band i wasnt going anywhere (it was easier to cruise at 100km in 4th than in 6th )

    Ive tried using 22D00 and 22D20
    34mm carbs
    Not too sure what jets i have in them.
    The air solenoids are plumbed up correctly (i think). What symptoms would i have if they werent?
    Stock air box
    No idea what pipes they are, they arent stock but they have no stamps to say what they are.

    No idea of pipes and jetting? now we're getting somewhere.Any RGV will struggle to pull 5th and 6th under 7000 anyway so not too much of a drama.
    Do you have a manual?You do really want to know what main jets you are running in both carbs as a starter.
    Have you done a plug chop? This will tell you if the main jets are generally the right size.
    However next point of reference after this should be the jet needle and in particular the clip position.Standard is in the middle (3rd) position of five.
    As an experiment raise the clip to the top of the needle and take her out for a ride and see if it is an improvement.Lowering the needle/raising the clip has the effect of leaning out the mixture in the quarter to half open throttle settings.

    For now dont worry about the diff SAPC's and air solenoids as only dyno dave types can tell the difference.
    Oh yeah do you have a manual???

  14. #224
    Join Date
    17th February 2005 - 11:36
    Bike
    Bikes!
    Location
    Christchurch
    Posts
    9,649
    22D00 is a Jap SAPC with the low/mid raped out of it. Bin it.. it's designed for a 32mm carb and a mighty 45PS at the crank.
    22D20 is another Jap SAPC, 45PS at the crank again.

    Most RGV owners have one... or two... or in some cases a box of them! Now you know why

    You want a 22D30, or a 23D70 (Aprilia RS250), or ideally a Zeeltronic box. Everything else is either a race unit (boom goes your engine) or some other restricted fucked up shit... see below...


  15. #225
    Join Date
    5th April 2004 - 20:04
    Bike
    Exxon Valdez
    Location
    wellington
    Posts
    13,381
    Id place a tenner, that it's running rich. Lower the needles a couple grooves and see if it's better.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •