Sidecar Racing

[Kornholio]

He probably thought he was about to get a handjob in return for taking you for a ride

I would be expecting the same thing............

[sidecar bob]

Well, the beemer is half done as planned. Gordy came over & helped big time last night, same again tonight.
He also made a very chur caliper braket for pinky out of Heineken box. It should work mint, after hes fed it into his cnc machine & copied it in alloy that is.

[Drew]

Well, the beemer is half done as planned. Gordy came over & helped big time last night, same again tonight.
He also made a very chur caliper braket for pinky out of Heineken box. It should work mint, after hes fed it into his cnc machine & copied it in alloy that is.

Ha! That's exactly what I used to make the template for our extra brake calliper.

[nodrog:Me]

Well, the beemer is half done as planned. Gordy came over & helped big time last night, same again tonight.
He also made a very chur caliper braket for pinky out of Heineken box. It should work mint, after hes fed it into his cnc machine & copied it in alloy that is.

The prototype is done, i just hope Ken didnt help with the dimensions.

[sidecar bob]

The prototype is done, i just hope Ken didnt help with the dimensions.

He was involved in the process right from the start.

[Drew]

The prototype is done, i just hope Ken didnt help with the dimensions.

He was involved in the process right from the start.

He's helpful like that.

[nodrog:Me]

He was involved in the process right from the start.

He's helpful like that.

Mint, i can blame him for the writing on it then!

[Fast Eddie]

where do you buy real tie wire/lock wire from? racing shit. I just bought some from bunnings and its shit, keeps snapping while under bugger all tension, when I try and lock wire stuff up.

[Weaver]

where do you buy real tie wire/lock wire from? racing shit. I just bought some from bunnings and its shit, keeps snapping while under bugger all tension, when I try and lock wire stuff up.

I use stainless mig wire. I wouldn't suggest going out and buying a whole roll of that though. I've seen people buying the proper stuff from a bike shop before.

[budda]

where do you buy real tie wire/lock wire from? racing shit. I just bought some from bunnings and its shit, keeps snapping while under bugger all tension, when I try and lock wire stuff up.

Your friendly local BIKE SHOP .... support the guys who support the Sport

[Fast Eddie]

cheers, I'm in chch so not sure whats about... place is all fucked since I last lived here. Damn quakes.

Will google some bike shops

[Fast Eddie]

Need some advice on disassembling my rear hub..

I've taken off as much as I can from the rear hub assembly.. I was now hoping the axle and that whole assembly would just slide out of the swing arm. But it doesn't.. I tapped it with a rubber mallet and doesn't seem to move.

Any ideas on how it would come out? Or if I should just hit it harder.. It looks like the splines on the axle are stopping it sliding through the bearings and sliding out.

[nodrog:Me]

Need some advice on disassembling my rear hub..

I've taken off as much as I can from the rear hub assembly.. I was now hoping the axle and that whole assembly would just slide out of the swing arm. But it doesn't.. I tapped it with a rubber mallet and doesn't seem to move.

Any ideas on how it would come out? Or if I should just hit it harder.. It looks like the splines on the axle are stopping it sliding through the bearings and sliding out.

Pull the circlip off first?

[Kornholio]

Pull the circlip off first?

A bigger hammer should dislodge that pesky circlip... presto

[Fast Eddie]

Pull the circlip off first?

There's no circlip there. Unless I'm blinder than I am retarded.