Sidecar Racing

**old rig** · 23rd April 2013, 20:24

Originally Posted by sidecar bob

Its a transformer. It will turn into a suitcase & come as hand luggage. that was meant to be cryptic

haha i get it
i bet it use to cum in a city

**swarfie** · 23rd April 2013, 20:31

Originally Posted by Kickaha

Knock us up about 1/2 a dozen of them would ya

Cancelled? holy crap that must have been a big one, even the Pirate didn't manage that

No worries, I'll write the progarms in the company time next week...where should I deliver them

On the Saturday we got two practice sessions and one race (which Jo and I won after a great battle with Jason Rees and Bryce Rose

) all of which Hoodie and Mark did not finish due to oil all over their rig. Sunday Jo and I won the first race and then the meeting was called due to oil ALL around the track. Felt really sorry for the NZPCRA fellas and fellesses as they didn't even get on the track

**Kornholio** · 24th April 2013, 00:57

Originally Posted by nodrog

choice he sent you a sky remote

Hey, I get infracted for that shit!

**nodrog:Me** · 24th April 2013, 08:12

Originally Posted by Kornholio

Hey, I get infracted for that shit!

Show me the money.

**sidecar bob** · 24th April 2013, 08:25

Originally Posted by old rig

haha i get it
i bet it use to cum in a city

Yep, & im going to put a schoolbag on the side for a sidechair & give Spike & Aaron the hurry up.

http://yahoo.aleado.com/lot?auctionI...443#enlargeimg

That site is worth a look, works pretty much like trademe. The $ shown under the yen price is $US.
If you see anything you want I have an agent up there that was a Tauranga bloke, & a total good bastard.
If anything, it will make you realise how cheap stuff is here.
Of course if the purchase is over $NZ400 it will attract customs duty of 15%

**Fast Eddie** · 24th April 2013, 16:25

Originally Posted by wildman

Cool photos Kai, you going to make a trailer like the one in the photos too?

Yip, I have already welded up the frame/trailer chassis and got the suspension on, drawbar etc. The hold back now is the 17" rims I bought.. murphys law that the center hole has a bloody little lip on it that is stopping it going onto the hub fully. Tried to get the dremel out to grind it off but the alloy is so soft that the dremel bit gets clogged up in 5 seconds. must think of a smarter way to get rid of the lip then can finish the trailer and tow the bike to Dunedin for some real work on it!

Originally Posted by Kickaha

If he did he'd only crash it

Well I wouldn't let my dad tow it over the Kaimais anyway...

**nodrog:Me** · 24th April 2013, 16:30

Originally Posted by Fast Eddie

...... must think of a smarter way to get rid of the lip ...

the right bit might help

**Fast Eddie** · 24th April 2013, 18:11

Originally Posted by nodrog

the right bit might help

post up a link of the correct one to use and I'll buy it if I haven't already tried it.. need to grind through a mag/alloy wheel.. I'm guessing its made out of alloy..

**nodrog:Me** · 24th April 2013, 18:27

Originally Posted by Fast Eddie

post up a link of the correct one to use and I'll buy it if I haven't already tried it.. need to grind through a mag/alloy wheel.. I'm guessing its made out of alloy..

**swarfie** · 24th April 2013, 18:36

Originally Posted by Fast Eddie

post up a link of the correct one to use and I'll buy it if I haven't already tried it.. need to grind through a mag/alloy wheel.. I'm guessing its made out of alloy..

Its called a LATHE...it removes metal radially

...or in my case a CNC Machining Centre does the same job Hahaha

**scrivy** · 24th April 2013, 18:42

Originally Posted by swarfie

Its called a LATHE...it removes metal radially

...or in my case a CNC Machining Centre does the same job Hahaha

.........and here was I thinking a hammer and cold chisel would suffice.............

**swarfie** · 24th April 2013, 18:48

Originally Posted by scrivy

.........and here was I thinking a hammer and cold chisel would suffice.............

RUFF carnt

**Kickaha** · 24th April 2013, 19:09

Originally Posted by Fast Eddie

Tried to get the dremel out to grind it off but the alloy is so soft that the dremel bit gets clogged up in 5 seconds. must think of a smarter way to get rid of the lip then can finish the trailer and tow the bike to Dunedin for some real work on it!

Take it to Royce Clives and get them to do it on a lathe, if I saw you doing that with a dremel I'd bash you

**Fast Eddie** · 24th April 2013, 19:44

Originally Posted by nodrog

hahaha.. it is a great tool.

Originally Posted by swarfie

Its called a LATHE...it removes metal radially

...or in my case a CNC Machining Centre does the same job Hahaha

Yip got access to lathes at phils farm.. infact I think I rested the wheel on the lathe while I used the dremel.. makes a good work bench.

Originally Posted by scrivy

.........and here was I thinking a hammer and cold chisel would suffice.............

good idea.. might just do that

Originally Posted by Kickaha

Take it to Royce Clives and get them to do it on a lathe, if I saw you doing that with a dremel I'd bash you

Don't wanna spend cash... but maybe I'll do that one day. Might try and figure out how to do it on a lathe myself. And you wouldn't know anythings been touched with the dremel, the little lip/ridge is like half a mm must be for a center cap to click onto, the dremel touches it, clogs up instantly and then just basically polishes the wheel.. fuckn thing. I just want it gone so the wheels go on the hubs and get this trailer finished.

You could try bash me.. I've been eating my spinach