How can I make my indicators stay on and not flash when riding?

**Ultrasonic2** · 27th July 2012, 16:31

Originally Posted by spanner spinner

fit a visi bike kit this is the easiest way to do what you want to achive.

i can not find such a thing

**davereid** · 28th July 2012, 10:57

Originally Posted by Ultrasonic2

i can not find such a thing

You need two relays and possibly an electronic flasher unit if the flash rate goes weird.

Cut the wire to the indicator. You now have a wire to the lamp and a wire back into the loom.

Contact 1 = Common. Wire to any circuit which is live when key is on.
Contact 2 = Normally Closed. Wire to Indicator lamp wire.
Coil = Wire to Ground
Coil = connect to indicator loom wire

Do same with another relay on the other side.

**schrodingers cat** · 28th July 2012, 17:28

Spend your time and effort on an advanced riding course with a focus on risk assessment and situational awareness.

Or just take the bus ffs

**Ultrasonic2** · 29th July 2012, 19:13

Originally Posted by schrodingers cat

Spend your time and effort on an advanced riding course with a focus on risk assessment and situational awareness.

Or just take the bus ffs

i'm beyond that licensed for 11 years and ride 5 days a week sun, rain or snow to get to work and yes i have ridden in the snow. and thanks to god i've never come off

**drrummer** · 21st May 2014, 03:57

Originally Posted by Gremlin

I've also corrected your spelling.

That's just rude.

**ruaphu** · 21st May 2014, 05:25

Go to your bike shop there is an over the counter product that simply interconnects with indicator circuits to fit any bike with single filament type indicators. A mate had it fitted to his cruiser, worked well. Can't remember what the brand was. Was legal, no issues with wofs etc. cheers

Sent from my iPhone using Tapatalk

**skippa1** · 21st May 2014, 05:39

Originally Posted by ruaphu

Go to your bike shop there is an over the counter product that simply interconnects with indicator circuits to fit any bike with single filament type indicators. A mate had it fitted to his cruiser, worked well. Can't remember what the brand was. Was legal, no issues with wofs etc. cheers

Sent from my iPhone using Tapatalk

He hasn't been on here since August 2012.......