Page 1 of 34 12311 ... LastLast
Results 1 to 15 of 501

Thread: Old multi-cylinder bikes of the 50s to later on. Japanese, British, Euro, etc

  1. #1
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823

    Old multi-cylinder bikes of the 50s to later on. Japanese, British, Euro, etc

    OK i have a few magazines articles that have some well engineered 4 stroke multi's (Plus the odd single) from back when basically the only rule was capacity
    IE Real race bikes.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Document (135).jpg 
Views:	142 
Size:	766.5 KB 
ID:	267700   Click image for larger version. 

Name:	Document (136).jpg 
Views:	109 
Size:	758.7 KB 
ID:	267704   Click image for larger version. 

Name:	Document (137).jpg 
Views:	98 
Size:	768.8 KB 
ID:	267705   Click image for larger version. 

Name:	Document (138).jpg 
Views:	91 
Size:	740.9 KB 
ID:	267706   Click image for larger version. 

Name:	Document (139).JPG 
Views:	86 
Size:	700.7 KB 
ID:	267707   Click image for larger version. 

Name:	Document (140).jpg 
Views:	111 
Size:	748.5 KB 
ID:	267708  
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  2. #2
    Join Date
    18th May 2007 - 20:23
    Bike
    RG50 and 76 Suzuki GP125 Buckets
    Location
    Auckland
    Posts
    10,473
    Thanks for that Husa .... I always enjoy these old mag articals you post.

  3. #3
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    More Benelli from the same magazine issue.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Document (141).jpg 
Views:	67 
Size:	761.5 KB 
ID:	267730   Click image for larger version. 

Name:	Document (143).jpg 
Views:	63 
Size:	628.2 KB 
ID:	267734   Click image for larger version. 

Name:	Document (142).jpg 
Views:	57 
Size:	644.4 KB 
ID:	267733   Click image for larger version. 

Name:	Document (144).jpg 
Views:	63 
Size:	624.4 KB 
ID:	267735   Click image for larger version. 

Name:	Document (145).jpg 
Views:	57 
Size:	605.7 KB 
ID:	267736   Click image for larger version. 

Name:	Document (146).jpg 
Views:	52 
Size:	616.6 KB 
ID:	267737  
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  4. #4
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Frits and I (Big Pics are Frits's) posted some pics of the V4 Yam 2 stroke 125 gp bike. (RA31 and RA31A)



    Was on the ESE thread
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Document (80).JPG 
Views:	69 
Size:	688.0 KB 
ID:	267743   Click image for larger version. 

Name:	Document (81).JPG 
Views:	66 
Size:	673.2 KB 
ID:	267746   Click image for larger version. 

Name:	Document (82a).jpg 
Views:	68 
Size:	764.8 KB 
ID:	267745   Click image for larger version. 

Name:	Document (83).JPG 
Views:	73 
Size:	651.6 KB 
ID:	267744   Click image for larger version. 

Name:	Document (84).jpg 
Views:	87 
Size:	767.2 KB 
ID:	267742  
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  5. #5
    Join Date
    4th November 2003 - 13:00
    Bike
    BSA A10
    Location
    Rangiora
    Posts
    12,711
    There was an RA31 at the Pukekohe classic festival in 2010 owned by Ferry Brouwer
    "If you can make black marks on a straight from the time you turn out of a corner until the braking point of the next turn, then you have enough power."


    Quote Originally Posted by scracha View Post
    Even BP would shy away from cleaning up a sidecar oil spill.
    Quote Originally Posted by Warren Zevon
    Send Lawyers, guns and money, the shit has hit the fan

  6. #6
    Join Date
    22nd March 2007 - 10:20
    Bike
    2015 HD Street 500
    Location
    Blenheim
    Posts
    2,178
    Who owns the Benelli Name now?

    They were meant to be very temperamental from what I have heard, but an extremely quick bike in their time
    To be old and wise, first you must be young and stupid.

  7. #7
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by Subike View Post
    Who owns the Benelli Name now?

    They were meant to be very temperamental from what I have heard, but an extremely quick bike in their time
    Don't know,South american deTomasi sold it along with Guzzi to ?

    Ok below Not works but more like the RS125 of its day only much rarer.
    Honda CR93


    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Document (147).jpg 
Views:	72 
Size:	770.0 KB 
ID:	267748   Click image for larger version. 

Name:	Document (148).jpg 
Views:	102 
Size:	712.2 KB 
ID:	267749   Click image for larger version. 

Name:	Document (149).jpg 
Views:	102 
Size:	657.6 KB 
ID:	267750   Click image for larger version. 

Name:	Document (150).jpg 
Views:	98 
Size:	602.3 KB 
ID:	267751   Click image for larger version. 

Name:	Document (125).JPG 
Views:	192 
Size:	610.3 KB 
ID:	267753  
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  8. #8
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    OK Honda's first TT winner.
    In just a few years their pace of development was startling,
    RC145 125cc 196.

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Document (155).jpg 
Views:	66 
Size:	679.6 KB 
ID:	267839   Click image for larger version. 

Name:	Document (156).jpg 
Views:	57 
Size:	755.1 KB 
ID:	267840   Click image for larger version. 

Name:	Document (157).jpg 
Views:	51 
Size:	764.9 KB 
ID:	267841   Click image for larger version. 

Name:	Document (158).JPG 
Views:	61 
Size:	685.0 KB 
ID:	267842  
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  9. #9
    Join Date
    3rd February 2004 - 08:11
    Bike
    1982 Suzuki GS1100GK, 2008 KLR650
    Location
    Wallaceville, Upper hutt
    Posts
    5,049
    Blog Entries
    4
    Not a genuine oldie but George Beales recreation of the Honda 6. I wish this picture had been released as a large poster, I'd buy a few.
    Love the sense of scale provided by the credit card.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	honda RC174.jpg 
Views:	153 
Size:	728.3 KB 
ID:	267849  
    it's not a bad thing till you throw a KLR into the mix.
    those cheap ass bitches can do anything with ductape.
    (PostalDave on ADVrider)

  10. #10
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by pete376403 View Post
    Not a genuine oldie but George Beales recreation of the Honda 6. I wish this picture had been released as a large poster, I'd buy a few.
    Love the sense of scale provided by the credit card.
    I did a exert from a feature about the Beale repoduction of the RC166 on the ESE thread somewhere.
    I thing the stuck in my mind was the metallurgy modern science was unable to reproduce all of it. The lab was amazed at the finish and materials and heat treatment from memory the lubrication was incrediably complex.

    Beale has done the Bennellis as well as the obvious Matchless G50's or was it Manx's etc.
    From memory he owned a chain of butcheries or similar so was definitely an enthusiast.
    Here is some pics of the RC166 From Honda.







    hear it here http://world.honda.com/MotoGP/histor.../05/index.html
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  11. #11
    Join Date
    17th April 2006 - 05:39
    Bike
    Various things
    Location
    Wellington
    Posts
    14,429
    Who says Honda's are gay!?

  12. #12
    Join Date
    3rd February 2004 - 08:11
    Bike
    1982 Suzuki GS1100GK, 2008 KLR650
    Location
    Wallaceville, Upper hutt
    Posts
    5,049
    Blog Entries
    4
    Quote Originally Posted by husaberg View Post
    Beale has done the Bennellis as well as the obvious Matchless G50's or was it Manx's etc.
    From memory he owned a chain of butcheries or similar so was definitely an enthusiast.
    Pharmacies actually, but close enough. Beale himself described building the Benelli replicas as "blacksmith work" compared to the Hondas
    it's not a bad thing till you throw a KLR into the mix.
    those cheap ass bitches can do anything with ductape.
    (PostalDave on ADVrider)

  13. #13
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Right you are should of Googled it. As i found the article i used the exert from on the first search
    http://www.motorcyclistonline.com/fe...x/viewall.html







    This retired pharmacist spent six years crafting replicas of Honda's maximum expression from its GP golden era in the '60s, the RC174 (top). Beale built a total of six, sold for almost a half-million dollars apiece. You can bet he wasn't always this cheery when he was chasing down nonexistent bearings for the project.


    Read more: http://www.motorcyclistonline.com/fe...#ixzz232XoF6ql




    When Honda created its fabled six-cylinder racebikes in the 1960s, it was pushing back the frontiers of the technically possible. Honda's attitude was that if its engineers could imagine it, they could build it--and it would win. The machines they created were the two-wheeled equivalent of the Apollo 11 spacecraft and the first manned mission to the moon in 1969. Yet if you're tempted to imagine, from the smug viewpoint of the 21st century, that re-creating one of Honda's Sixes ought to be fairly easy, think again. Even nearly 40 years later, much of what Honda's race shop achieved remains at the cutting edge of what can be done with metal. That one man attempted to reproduce it in a sleepy English village is staggering. Cold fusion might have been easier. That man is George Beale. A retired pharmacist and for many years a sponsor of the cream of U.K.-based riders, Beale is better known for the other race replicas he's already built. Among his last big projects was making 1969 four-cylinder GP Benellis from scratch, as easy as building bicycles compared to this job. So why take on something so mind-numbingly complex as the last Honda Six, the 297cc RC174? .... Then, some years ago, a distinguished visitor dropped by his Leicestershire home. His name was Sato, director of the factory's own museum, Honda Collection Hall. "I was building a Benelli at the time," remembers Beale, "and he must have been quite impressed, because before he left he asked if I'd consider building a Honda Six. I never imagined I'd get permission from Honda. Later I wrote to Mr. Sato saying I'd love to build a Six, and he eplied with permission to undertake the project. "That was the easy bit. In comparison, the Benelli had been a doddle, using many parts from proprietary suppliers which are still fairly readily available today, such as forks, engine plumbing and bearings, all of which can be the devil to reproduce from scratch. But an old friend, Teruhisa `Teri' Murayama, already had an original RC174, and I persuaded him to send what he calls his `pension scheme' to England so I could copy it. This retired pharmacist spent six years crafting replicas of Honda's maximum expression from its GP golden era in the '60s, the RC174 (top). Beale built a total of six, sold for almost a half-million dollars apiece. You can bet he wasn't always this cheery when he was chasing down nonexistent bearings for the project. This retired pharmacist spent six years crafting replicas of Honda's maximum expression fr"Later, I went to Japan to visit Teri and Mr. Sato and discuss the project. Sato agreed to let me borrow the missing parts, but unfortunately no drawings were available since even Honda itself had none. "When Teri's Six arrived, we took the engine out and thought it must be empty because it was so light." Anxiously, Beale stripped it, but everything inside seemed complete. In fact, everything was brand-new. It had never even been started. "This was probably the engine built for Hailwood to race in '68, just before Honda pulled out of Grands Prix," he says. "So it was ideal for us. All the parts were to the very latest spec, and there would be no need to estimate wear to reproduce them." Among other parts acquired were banks of the Six's jewel-like carburetors. Both the 250cc and 297cc sixes were raced at various times with round- and flat-slide carbs, depending on the power characteristics desired for each race. Beale ended up with a set of each. Bit by bit, all the original parts came together. All that remained to be done was to re-create these thousands of pieces to the tiniest tolerances, put them together and make them work like Honda did in '67. Beale soon got a taste of what lay ahead. The first parts made were the oil coolers. If that seems an odd beginning, it was because Honda's own Sixes (the ones it was bringing to its 50th birthday celebration at the '98 TT) had a problem with leaking coolers. When even Honda couldn't get new ones made, Beale was asked if he could help. "I went to several radiator specialists," Beale remembers, "all of whom said they couldn't match the originals, until I came across Anglian Radiators in Cambridge. They specialize in small production runs, and could source the characteristic frilly finning of the Honda parts from Sweden. Unfortunately it was the wrong size, so every one had to be laboriously cut down by hand with scissors." In total, 30 coolers were made, including six for Honda, but the process took nine months. "And this is the first bloody bit," Beale thought, beginning to realize what he'd taken on. "I could have just bought an off-the-shelf cooler which would have done the job, but the point was that the replica had to be exactly right--or as near as it was possible to make it." Yet even that was nothing compared to the engine parts. Most of these were made by JPX, a French company based near Le Mans, France, which specializes in aircraft and high-tech F1 car components. At JPX, the original engine was thoroughly photographed, then carefully stripped, and a detailed assembly handbook created. Every item was measured to the minutest accuracy and X-rayed, and had detailed three-dimensional drawings made--502 in all. Sophisticated hardness testing and metallurgical analysis was conducted on every piece, which revealed some interesting issues. Not a single engine bearing was a standard size, and some of the alloys and surface treatments used were quite unknown to modern science. Soichiro Honda, founder of the company, was also a gifted metallurgist. In other words, apart from a few nuts and bolts, every single one of the engine's hundreds of components would have to be made from scratch. And not a single one of them, according to Julian Charnol, the man responsible for engine assembly, is anything less than extraordinary. Little wonder JPX regards the RC174's Six as "the most difficult engine we have ever seen ... so full of hidden complexity." "When they analyzed the engine," Beale recalls, "the pattern-makers were amazed--really impressed by the advanced techniques Honda must have had to make it, which few other companies could have done." Yet at the time it designed the first Six (the RC164 250), Honda had been racing internationally for just five years. Above all, there was the Six's crankshaft--beautiful, but a bitch to re-create. By '64, Honda had already licked the technology to get the most out of inline-four engines. Adding two additional cylinders might not sound such a big leap forward, yet the implications for engine assembly are huge. The Six's crankshaft is pressed up from 13 components, each no bigger than a domino. Unsupported, it is so flimsy it can be deformed by hand, yet it would have to spin without deflecting at more than 17,000 rpm. Pressing it together with the necessary accuracy--0.01 degree--would require an elaborate set of jigs weighing more than the complete bike; if even one part became slightly misaligned, the entire assembly would be scrap. Ludovic Surcin, designer of the jigs, likened the task to balancing 13 billiard balls on top of each other--and persuading them to stay put. At one stage it was hoped to use a bulletproof modern crank with split con-rods, but there was simply no room inside the Six's tiny crankcases to accommodate the extra bulk. Consequently the replica retains a design exactly like the original's. With almost no flywheel effect to slow it down, one careless blip of the throttle can send the crank from zero revs to more than 20,000, whereupon it would simply break. Other details emerged that showed the remarkable lengths to which the Six's design team had gone to reduce the mass of moving components. JPX was astounded to discover three different types of con-rods in each engine, with progressively larger big-end bearings for the rods nearer the center, where loadings are higher. Even 40 years ago the benefit of such a strategy was well-known, but no one else bothered to take advantage of it. Any other manufacturer would have made six identical rods, each able to cope with the highest possible loading. But Honda's obsessive desire to have no component heavier than it need be caused the engineers to tailor each pair precisely for their function. In the same way, the seven main bearings are also different, ranging from 24mm in diameter at the center to 14mm for the outer pairs. The crankshaft itself runs on carriers bolted to the top crankcase half, which takes all the loads. Thus the bottom half can be made much lighter and flimsier from magnesium alloy.Similarly, the camshafts (each head has four, linked together in pairs) are barrel-shaped, concentrating their mass at the point of greatest flex, the center, and thus saving weight at their ends. But this in turn means the geometry of the valve gear varies from one cylinder to the next, with different cam profiles. The benefit is tiny, the resulting difficulties immense, yet at every turn Honda went to such obsessive lengths seemingly regardless of cost. Other than the crankshaft, JPX's biggest challenge was in replicating the Six's tiny but elaborate castings at its in-house foundry. The cylinder block, for instance, is sand-cast using a three-dimensional jigsaw of no less than 29 interlocking sub-molds (known as cores). Casting the heads requires 23, while even the relatively simple sump needs 15. Even with the very latest computer-controlled technology, machining the major castings was even more complex. JPX's CNC machine--as big as a truck--took several weeks to set up for the job. The machining operation itself took 14 hours and 90 tool heads to machine a single cylinder block. How Honda engineers of the early 1960s did this simply staggers the mind. The engine is riddled with galleries and tiny oilways, unseen by anything but X-ray, with some only 1mm apart. Sometimes two narrow oilways are combined, saving perhaps 0.5mm in width on a single, larger one. Cumulatively this allows the engine to be perhaps 3mm narrower than it might otherwise--yet another minute but worthwhile return on the work involved. The tiny pistons are machined from solid, and run in iron cylinder liners. Tolerances are so fine the liners must be dipped in liquid nitrogen before being pressed into the pre-heated block. To reduce internal friction, no oil control rings are fitted, just paired compression rings. As with a few other highly stressed components, JPX had the wrist pins coated with a space-age diamond-like finish, the hardest surface treatment known to science. At the other extreme, many of the new engine's gaskets were simply cut out using a pair of scissors. Nothing so crude would do for the carburetors, replicas of Honda's round-slide Keihins. The floats are individually modified from those of a current Honda road bike, and even the jets had to be specially machined. Each bank of six cost more than $35,000 to make. The Six is littered with bearings. All but one or two are needle, ball or roller, which offer less drag than plain bearings. At one stage during the project JPX had one man who did nothing but contact bearing manufacturers all over the world trying to source parts which might fit the Six's bespoke demands. After several weeks he had located perhaps one-third of the team's needs. The rest, including bearing cages, had to be laboriously made from scratch. The more you delve into the Honda Six's inner secrets, the more you marvel at the skill and confidence of the men who first built it, almost four decades ago. "Compared to this," Beale sighs, "the Benelli was built by a blacksmith." MC Read more:
    When Honda created its fabled six-cylinder racebikes in the 1960s, it was pushing back the frontiers of the technically possible. Honda's attitude was that if its engineers could imagine it, they could build it--and it would win. The machines they created were the two-wheeled equivalent of the Apollo 11 spacecraft and the first manned mission to the moon in 1969.

    Y

    Read more: http://www.motorcyclistonline.com/fe...#ixzz232VWy2ql
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  14. #14
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    The Name may seem familiar.........
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Document (159).jpg 
Views:	71 
Size:	721.4 KB 
ID:	267990   Click image for larger version. 

Name:	Document (160).jpg 
Views:	49 
Size:	750.2 KB 
ID:	267991   Click image for larger version. 

Name:	Document (161).jpg 
Views:	55 
Size:	763.7 KB 
ID:	267992   Click image for larger version. 

Name:	Document (162).jpg 
Views:	74 
Size:	751.7 KB 
ID:	267993  
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  15. #15
    Join Date
    4th November 2003 - 13:00
    Bike
    BSA A10
    Location
    Rangiora
    Posts
    12,711
    You can buy one new if you like http://thekneeslider.com/archives/20...-continuation/

    Lino Tonti built his own bike to(Linto), before he went and designed some other Italian shitters
    "If you can make black marks on a straight from the time you turn out of a corner until the braking point of the next turn, then you have enough power."


    Quote Originally Posted by scracha View Post
    Even BP would shy away from cleaning up a sidecar oil spill.
    Quote Originally Posted by Warren Zevon
    Send Lawyers, guns and money, the shit has hit the fan

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •