Results 1 to 7 of 7

Thread: Stoner's MotoGP bike on Kiwi visit

  1. #1
    Join Date
    1st November 2005 - 08:18
    Bike
    F-117.
    Location
    Banana Republic of NZ
    Posts
    7,048

    Stoner's MotoGP bike on Kiwi visit

    http://www.nzherald.co.nz/motoring/n...ectid=10828217
    Click image for larger version. 

Name:	SCCZEN_200812SPLcasey1_460x230.jpg 
Views:	13 
Size:	50.4 KB 
ID:	268636
    As the cover slides off the bright-orange paintwork it's obvious this is no ordinary race bike. Bruce Nielsen's hands all but flutter as he tells me about the hand-built RC212V that took Casey Stoner to MotoGP victory last season.

    Honda is a technological octopus and its development arms work together, so the solid state gyro within this bike was developed for the Asimo robot. Half the size of a pack of cards, it's what lets it walk, run and jump. In the bike it knows its exact attitude and what the rider is doing, then tells the engine how much power to apply: "It's a completely dynamic system," Nielsen says.

    He's technical manager for the brand here, and a mine of information. "The hand-built frame took 50 hours for one senior welding technician to produce. He says it's a love-hate relationship with the rider, especially with Dani Pedrosa. He asks for a bit more flex, a bit more movement and the engineers have to go back and redesign the frame. Now they must include the rider as a dimension in the design equation to get good results."

    They build the titanium exhaust, too. "The engine technicians give them a tuned length and a few other parameters then they reverse engineer it to fit within the frame. It's especially challenging as it snakes back on itself under the seat to get the tuned length right. It weighs nothing and lasts less long than the engine thanks to heat stress - in a road bike it'd last 1000km," he says.

    Yet all this cutting-edge tech still relies on a human skill.

    "Precision equipment measures each gear during assembly, but the final check is by a master technician and done by feel. It might measure okay but if it doesn't feel right, they keep on working."

    This RC212V boasts better power-to-weight than a Formula One car, put to the ground via a single contact patch smaller than a playing card, through tyres machined from solid billet rubber.

    Like almost every part on board this bike, they're not available for sale but hand-built to order and priced to suit. "At the start of the season the team works out what it will crash or break and orders spares for 12 weeks. Because they're hand-made, Honda only makes what is ordered and there's no spare waiting on a shelf. Anywhere."

    No wonder this one was flown in under cover of darkness and kept under wraps until today's conference, accompanied by the brand's head of global sales to celebrate 40 years of Blue Wing Honda in New Zealand.
    TOP QUOTE: “The problem with socialism is that sooner or later you run out of other people’s money.”

  2. #2
    Join Date
    31st March 2005 - 02:18
    Bike
    CB919, 1090R, R1200GSA
    Location
    East Aucks
    Posts
    10,499
    Blog Entries
    140
    Work of Art doesn't quite cut it, does it?
    Quote Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
    It's barking mad and if it doesn't turn you into a complete loon within half an hour of cocking a leg over the lofty 875mm seat height, I'll eat my Arai.

  3. #3
    Join Date
    1st November 2005 - 08:18
    Bike
    F-117.
    Location
    Banana Republic of NZ
    Posts
    7,048
    I'm not sure. Certainly not hideous on the eye but I'd like to go along and have a look at it.
    TOP QUOTE: “The problem with socialism is that sooner or later you run out of other people’s money.”

  4. #4
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    8,238
    Quote Originally Posted by Swoop View Post

    No wonder this one was flown in under cover of darkness and kept under wraps until today's conference, accompanied by the brand's head of global sales to celebrate 40 years of Blue Wing Honda in New Zealand.
    maybe on KB but it's been on facebook for a few days with piccies...

  5. #5
    Join Date
    31st March 2005 - 02:18
    Bike
    CB919, 1090R, R1200GSA
    Location
    East Aucks
    Posts
    10,499
    Blog Entries
    140
    Quote Originally Posted by Swoop View Post
    I'm not sure. Certainly not hideous on the eye but I'd like to go along and have a look at it.
    I wasn't talking about the Australian poofter

    50 hours for a frame, mmm, not enough flex, do it again. Exhaust lasts less than the engine (maybe they should put regs on that). Crazy engineering pushing the boundaries...
    Quote Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
    It's barking mad and if it doesn't turn you into a complete loon within half an hour of cocking a leg over the lofty 875mm seat height, I'll eat my Arai.

  6. #6
    Join Date
    24th September 2008 - 01:32
    Bike
    a shiny new(ish) one
    Location
    Dunedin
    Posts
    3,650
    awesome piece of artwork/machinery

  7. #7
    Join Date
    17th April 2006 - 05:39
    Bike
    Various things
    Location
    Wellington
    Posts
    14,429
    "Tyres machined from solid billet rubber"

    No wonder they've got chatter issues.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •