Results 1 to 7 of 7

Thread: Telecom modem for ClearNet customer?

  1. #1
    Join Date
    9th November 2005 - 18:45
    Bike
    2005 Z750S
    Location
    Wellington
    Posts
    1,136

    Telecom modem for ClearNet customer?

    My Mother has a D-Link modem, and is a Clear customer. (Via copper telephone line ADSL.)

    Her modem is fine, but has no WiFi and only one Ethernet port.

    I have a spare brand-new Telecom supplied "Technicolor" modem/router that has WiFi and four ports, so figured I'd see if I could get that working for her.

    Sadly - couldn't make it work on my first attempt. The "Technicolor" unit seems to hide most of the in-depth settings, so it was hard to see what I could change, other than user name/password.

    To a certain extent, ADSL is ADSL, but I suppose some "magic" is occurring at the Telecom/Clear interface. It'd be sad if the Telecom branded modem is in some way "locked" to Xtra-only. They do recognise customers via phone number, and there's a generic user id in the modem by default, but I wouldn't have expected this to prevent other use - with a little reconfiguring.

    I know this is a bit "how long is the string", but does anyone have advice on what might or might not be needed?
    Measure once, cut twice. Practice makes perfect.

  2. #2
    Join Date
    25th April 2009 - 17:38
    Bike
    RC36, RC31, KR-E, CR125
    Location
    Manawatu
    Posts
    7,364
    There might be an advanced user login that allows you to see that sort of stuff? Or a tiny link you need to click perhaps? I've not heard of routers that are linked to one specific isp before. Alternatively, just plug the two together and see if it detects the internet from the old one and passes it through to the wireless. Or even more alternatively, just spend 30 bucks or so and get another second hand wireless one that isn't so locked up.
    "A shark on whiskey is mighty risky, but a shark on beer is a beer engineer" - Tad Ghostal

  3. #3
    Join Date
    4th October 2008 - 16:35
    Bike
    R100GSPD
    Location
    Wellington
    Posts
    10,240
    i just went on trade me .got a dlink wireless router and plugged that in to my telecom modem,wireless plus 4 ports

  4. #4
    Join Date
    31st March 2005 - 02:18
    Bike
    CB919, 1090R, R1200GSA
    Location
    East Aucks
    Posts
    10,499
    Blog Entries
    140
    A lot of ISPs now use port authentication so the username and modem doesn't matter, but some ISPs still use usernames etc.

    Rarely have I seen an ISP supplied modem pre-configured that's decent, most are crappy (unless it's the likes of Orcons Siemens unit). Unless you can find some sort of advanced login, or an edit function, bin it and get another modem...

    Plugging something into the modem (like a switch or wireless access point) isn't going to cost much less than an all in one unit.
    Quote Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
    It's barking mad and if it doesn't turn you into a complete loon within half an hour of cocking a leg over the lofty 875mm seat height, I'll eat my Arai.

  5. #5
    Join Date
    6th May 2012 - 10:41
    Bike
    invisibike
    Location
    pulling a sick mono
    Posts
    6,054
    Blog Entries
    4
    d-link are shit.

    should not be a problem, does it have a "quick setup wizard".

    i have no idea what a technicolor modem is, i assume you're logging in through 10.1.1.1 or something, right?

  6. #6
    Join Date
    1st July 2007 - 17:40
    Bike
    my little pony
    Location
    shoebox on middle of road
    Posts
    1,522
    Quote Originally Posted by Akzle View Post
    d-link are shit.

    should not be a problem, does it have a "quick setup wizard".

    I have no idea what a technicolor modem is, i assume you're logging in through 10.1.1.1 or something, right?
    I thought you fullas invented wireless, when a whole was dug so deep no traces of copper could be found.

  7. #7
    Join Date
    9th November 2005 - 18:45
    Bike
    2005 Z750S
    Location
    Wellington
    Posts
    1,136
    Yeah, the reason I don't need it myself is I've got a nice Netgear thing I bought myself, and it's all nicely configurable and such. Just wanted to try this for my old folks, as it was essentially free.

    If it comes to buying something, there's plenty of options.

    Next time I'm up that way, will make a full study of it...
    Measure once, cut twice. Practice makes perfect.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •